EUVIMEDDescubrir EUVIMED
Crossref

Optimization of Lithium Disilicate Glass-Ceramic Crowns: Finish Line, Scanning, and Processing Methods

Rodrigo Ottoni, Jason Alan Griggs, Pedro Henrique Corazza, Marcia Borba

International Journal of Prosthodontics · 2023

DOI: 10.11607/ijp.7598 ↗

At a glance

Journal article in International Journal of Prosthodontics, 2023. Written by Rodrigo Ottoni and 3 co-authors. Major MEDLINE topics: Dental Prosthesis Design, Dental Porcelain.

ResumenSubjectsDatos bibliográficosCiteRelated studies

Abstract (original language)

PURPOSE: To investigate the optimal combination of factors (finish line, scanning, and ceramic processing) to achieve the best values of both adaptation and fracture load for lithium disilicate crowns (LD). MATERIALS AND METHODS: Two abutment preparations, chamfer (C) and rounded shoulder (S), were produced with a dentin analog material and scanned with either extraoral (E) or intraoral (I) scanners. Images were processed using CAD software to design a premolar. Blocks of LD were milled using a CAD/CAM system (CAD). For the press technique (PRE), crowns were first 3D printed using a polymeric material, then heat-pressing protocol was performed. Design of experiments was used to plan four experimental groups (n = 10): CAD-CI, CAD-SE, PRE-CE, and PRE-SI. Two dependent variables were analyzed: adaptation, measured using the replica technique; and fracture load of the cemented crowns. Fractographic analysis was performed. Data were analyzed using ANOVA and regression statistical analyses. RESULTS: There was no significant effect of the scanning method and finish line on the gap thickness in the different regions. For the processing method, CAD resulted in larger gap thickness in the occlusal, axial angle, and marginal areas and a smaller gap in the axial area (P 1000 N) and 40% adaptation (< 200 µm). CONCLUSIONS: The optimum combination of factors for all-ceramic crowns is chamfer abutment preparation, extraoral scanning, and the press technique (combined with 3D printing). Int J Prosthodont 2023;36:e103-e118.

Subjects

MeSH terms (MEDLINE)

Dental Prosthesis DesignDental PorcelainCeramicsCrownsComputer-Aided DesignMaterials TestingDental Marginal Adaptation

Substances

lithia disilicateDental Porcelain

Cite

APA

Ottoni, R., Griggs, J. A., Corazza, P. H., & Borba, M. (2023). Optimization of Lithium Disilicate Glass-Ceramic Crowns: Finish Line, Scanning, and Processing Methods. International Journal of Prosthodontics. https://doi.org/10.11607/ijp.7598

Vancouver

Ottoni R, Griggs JA, Corazza PH, Borba M. Optimization of Lithium Disilicate Glass-Ceramic Crowns: Finish Line, Scanning, and Processing Methods. International Journal of Prosthodontics. 2023. doi:10.11607/ijp.7598

BibTeX
@article{Ottoni2023,
  author = {Ottoni, Rodrigo and Griggs, Jason Alan and Corazza, Pedro Henrique and Borba, Marcia},
  title = {Optimization of Lithium Disilicate Glass-Ceramic Crowns: Finish Line, Scanning, and Processing Methods},
  journal = {International Journal of Prosthodontics},
  year = {2023},
  doi = {10.11607/ijp.7598}
}
Start for free →