Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses
Journal of Prosthodontic Research · 2023 · 68 (2) · 326-335
DOI: 10.2186/jpr.jpr_d_23_00089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2023. Verfasst von Pisit Suksuphan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative and Esthetic Dentistry, Faculty of Dentistry, Thammasat University, Pathumtani, Thailand. Hauptthemen laut MEDLINE: Dental Porcelain, Crowns. Die Arbeit wurde bisher 89-mal zitiert (Crossref) und nennt 53 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: To evaluate the marginal adaptation and fracture resistance of three computer-aided design/computer-assisted manufacturing hybrid dental materials with different occlusal thicknesses. METHODS: Ninety single-molar crowns were digitally fabricated using a milled hybrid nanoceramic (Cerasmart, CE), polymer-infiltrated ceramic network (PICN, Vita Enamic, VE), and 3D-printed materials (Varseosmile, VS) with occlusal thicknesses of 0.8, 1, and 1.5 mm (10 specimens/group). Anatomical 3D-printed resin dies (Rigid 10K) were used as supporting materials. A CEREC MCX milling unit and a DLP-based 3D printer, Freeform Pro 2, were utilized to produce the crown samples. Before cementation, the marginal adaptation, absolute marginal discrepancy (AMD), and marginal gap (MG) were assessed using micro-CT scanning. After cementation with self-adhesive resin cement, fracture resistance was evaluated using a universal testing machine. The number of fractured crowns and the maximum fracture values (N) were recorded. Data were statistically analyzed using both one- and two-way ANOVA, followed by Tukey's honestly significant difference (HSD) test. RESULTS: For all occlusal thicknesses, the VS crowns demonstrated the lowest AMD and MG distances, significantly different from those of the other two milling groups (P 0.05). All VS crowns were fractured using the lowest loading forces (1480.3±226.1 to 1747.2±108.7 N). No CE and 1 and 1.5 mm VE crowns fractured under a 2000 N maximum load. CONCLUSIONS: All hybrid-material crowns demonstrated favorable marginal adaptation within a clinically acceptable range, with 3D printing yielding superior results to milling. All materials could withstand normal occlusal force even with a 0.8 mm occlusal thickness.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Restorative and Esthetic Dentistry, Faculty of Dentistry, Thammasat University, Pathumtani, Thailand.
- Department of General Dentistry, Faculty of Dentistry, Srinakharinwirot University, Bangkok, Thailand.
- Department of Materials of Science, Faculty of Science, Chulalongkorn University, Bangkok, Thailand.
Zitieren
APA
Suksuphan, P., Krajangta, N., Didron, P. P., Wasanapiarnpong, T., & Rakmanee, T. (2023). Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses. Journal of Prosthodontic Research, 68(2), 326-335. https://doi.org/10.2186/jpr.jpr_d_23_00089
Vancouver
Suksuphan P, Krajangta N, Didron PP, Wasanapiarnpong T, Rakmanee T. Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses. Journal of Prosthodontic Research. 2023;68(2):326-335. doi:10.2186/jpr.jpr_d_23_00089
BibTeX
@article{Suksuphan2023,
author = {Suksuphan, Pisit and Krajangta, Nantawan and Didron, Pavinee Padipatvuthikul and Wasanapiarnpong, Thanakorn and Rakmanee, Thanasak},
title = {Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses},
journal = {Journal of Prosthodontic Research},
year = {2023},
volume = {68},
number = {2},
pages = {326--335},
doi = {10.2186/jpr.jpr_d_23_00089}
}
EUVIMED