EUVIMEDDescoperă EUVIMED
Crossref

Influence of Post Length, Post Material, and Substance Loss on the Fracture Resistance of Endodontically Treated Teeth: A Laboratory Study

Abdulaziz Samran, Bilal Mourshed, Mohammed A Ahmed, Majed Al-Akhali, Matthias Kern

The International Journal of Prosthodontics · 2023

DOI: 10.11607/ijp.7468 ↗

At a glance

Journal article in The International Journal of Prosthodontics, 2023. Written by Abdulaziz Samran and 4 co-authors. Major MEDLINE topics: Post and Core Technique, Tooth, Nonvital, Tooth Fractures. Cited 11 times so far (Crossref).

RezumatSubjectsDate bibliograficeCiteRelated studies

Abstract (original language)

PURPOSE: To evaluate the effects of post length, post material, and substance loss on the fracture resistance of endodontically treated mandibular premolars. MATERIALS AND METHODS: A total of 96 extracted human mandibular first premolars were endodontically treated and divided into 12 test groups (n = 8 each) based on the number of residual walls (one/two), post material (glass-fiber/titanium), and post length (5 mm, 7.5 mm, and 10 mm). After luting the posts, specimens received a composite resin core and a crown preparation with a 1.5-mm ferrule. Cast cobalt-chromium crowns were cemented using glass-ionomer cement. After 1,200,000 chewing cycles with a load of 49 N and simultaneous thermocycling (5°C to 55°C), specimens were quasi-statically loaded at 30 degrees to the longitudinal axis of the tooth until fracture. Fracture loads were analyzed using three-way, two-way, and one-way ANOVA (α = .05). Fracture modes were examined under a stereomicroscope (×25 magnification) and recorded. RESULTS: The mean ± SD fracture loads ranged from 642 ± 190 N (one wall, glass fiber, 5 mm) to 1,170 ± 130 N (two walls, titanium, 7.5 mm). The mean fracture load of titanium posts was significantly higher than that of glass-fiber posts (P < .001), and the 7.5-mm post length exhibited significantly higher fracture loads than groups with 5-mm and 10-mm post length (P = .008). CONCLUSIONS: Teeth restored with titanium posts revealed considerably higher fracture resistance than teeth restored with glass-fiber posts, especially if 7.5-mm-length posts were used.

Subjects

MeSH terms (MEDLINE)

Post and Core TechniqueTooth, NonvitalTooth FracturesHumansTitaniumCrownsComposite ResinsDental Stress AnalysisDental Restoration Failure

Substances

TitaniumComposite Resins

Cite

APA

Samran, A., Mourshed, B., Ahmed, M. A., Al-Akhali, M., & Kern, M. (2023). Influence of Post Length, Post Material, and Substance Loss on the Fracture Resistance of Endodontically Treated Teeth: A Laboratory Study. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.7468

Vancouver

Samran A, Mourshed B, Ahmed MA, Al-Akhali M, Kern M. Influence of Post Length, Post Material, and Substance Loss on the Fracture Resistance of Endodontically Treated Teeth: A Laboratory Study. The International Journal of Prosthodontics. 2023. doi:10.11607/ijp.7468

BibTeX
@article{Samran2023,
  author = {Samran, Abdulaziz and Mourshed, Bilal and Ahmed, Mohammed A and Al-Akhali, Majed and Kern, Matthias},
  title = {Influence of Post Length, Post Material, and Substance Loss on the Fracture Resistance of Endodontically Treated Teeth: A Laboratory Study},
  journal = {The International Journal of Prosthodontics},
  year = {2023},
  doi = {10.11607/ijp.7468}
}
Start for free →