EUVIMEDEUVIMED entdecken
Validierungsstudie

A Polyurethane Foam Bone Analogue Material Model for Computational Simulations: Calibration, Validation, and the Impact of Crushable Foam Yield Stress Ratio

Sara Sadeqi, Snehal S Shetye iD

Journal of Biomechanical Engineering · 2026

DOI: 10.1115/1.4070191 ↗

Kurz gefasst

Validierungsstudie in der Zeitschrift Journal of Biomechanical Engineering, 2026. Verfasst von Sara Sadeqi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Division of Applied Mechanics, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, 10903 New Hampshire Ave, BLDG 62, R…. Hauptthemen laut MEDLINE: Polyurethanes, Stress, Mechanical, Finite Element Analysis, Computer Simulation. Die Arbeit nennt 51 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rigid polyurethane (PU) bone foam is widely used in biomechanical experiments and simulations, making accurate characterization of its material properties crucial for developing reliable models. However, there is currently no publicly available calibrated and validated material model for PU bone foam that is practical across different loading states. This study aimed to develop and validate an open-source material model for PU bone foam. We utilized in-house data from uniaxial compression, laterally confined compression, and tensile tests, as well as shear test data provided by the manufacturer, to inform the material model parameters for transversely isotropic elasticity, crushable foam plasticity, and ductile damage initiation and evolution in finite element (FE) simulations. The material model was tested in simulations of shear, compression, screw pullout, and spinal cage subsidence tests. Validation results showed good agreement with experimental data, with nearly all outputs of interest falling within one standard deviation of the mean experimental values. The effect of varying the crushable foam yield stress ratio (k) was also investigated. Increasing the k value resulted in decreased compressive strength in the compression test, a reduction in subsidence yield load, and an increase in shear strength. Changing k had no clear effect on pullout force.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyurethanesStress, MechanicalFinite Element AnalysisComputer SimulationBone and BonesBiomimetic MaterialsCalibrationMaterials TestingCompressive StrengthTensile Strength

Stichwörter der Autor:innen

finite element analysisin silico simulationssawbones material propertiesscrew pulloutspinal cage subsidence

Substanzen

Polyurethanespolyurethane foam

Autor:innen und Institutionen

  • Division of Applied Mechanics, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, 10903 New Hampshire Ave, BLDG 62, Room 2215, Silver Spring, MD 20993.
  • United States Food and Drug Administration.

ORCID-Profile: Snehal S Shetye

Zitieren

APA

Sadeqi, S., & Shetye, S. S. (2026). A Polyurethane Foam Bone Analogue Material Model for Computational Simulations: Calibration, Validation, and the Impact of Crushable Foam Yield Stress Ratio. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4070191

Vancouver

Sadeqi S, Shetye SS. A Polyurethane Foam Bone Analogue Material Model for Computational Simulations: Calibration, Validation, and the Impact of Crushable Foam Yield Stress Ratio. Journal of Biomechanical Engineering. 2026. doi:10.1115/1.4070191

BibTeX
@article{Sadeqi2026,
  author = {Sadeqi, Sara and Shetye, Snehal S},
  title = {A Polyurethane Foam Bone Analogue Material Model for Computational Simulations: Calibration, Validation, and the Impact of Crushable Foam Yield Stress Ratio},
  journal = {Journal of Biomechanical Engineering},
  year = {2026},
  doi = {10.1115/1.4070191}
}
Kostenlos starten →