EUVIMEDEUVIMED entdecken
Crossref

Tribological Properties of Fused Deposition Modeling-Printed Polylactic Acid and PLA-CF: Extrusion Temperature and Internal Structure

Paweł Zawadzki, Justyna Rybarczyk, Adam Patalas, Natalia Wierzbicka, Remigiusz Łabudzki, Băilă Diana, Fodchuk Igor, Bonilla Mirian

Journal of Tribology · 01.02.2026 · 148 (2)

DOI: 10.1115/1.4068991 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Tribology, online erschienen am 16.07.2025. Verfasst von Paweł Zawadzki und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 54 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing using fused deposition modeling (FDM) is widely recognized for its capacity to produce custom-designed components, yet challenges persist in tailoring material properties for tribological applications. This study investigated the influence of manufacturing parameters, including extrusion temperature, carbon fiber (CF) reinforcement, and internal structural design, on the friction and wear performance of FDM-printed polylactic acid (PLA) and PLA-CF composites. Samples were produced using extrusion temperatures from 190 °C to 240 °C, with two distinct internal geometries: one featuring two perpendicular intersecting walls forming a single node and the other three walls at 120-deg angles. Results show that extrusion temperatures in the 190–220 °C range yield stable friction coefficients (COF), while deviations from this range lead to instability due to insufficient material flow or thermal degradation. CF reinforcement significantly reduces COF and enhances wear resistance, albeit at the expense of increased wear on counter surfaces due to its abrasive properties. The internal structure substantially impacts performance, with the two-wall design more effectively minimizing wear and friction and the three-wall arrangement offering consistent COF across varying temperatures. These findings highlight the critical interplay between manufacturing parameters, material composition, and internal design in optimizing FDM-printed components for applications demanding high durability and low friction.

Zitieren

APA

Zawadzki, P., Rybarczyk, J., Patalas, A., Wierzbicka, N., Łabudzki, R., Diana, B., Igor, F., & Mirian, B. (2026). Tribological Properties of Fused Deposition Modeling-Printed Polylactic Acid and PLA-CF: Extrusion Temperature and Internal Structure. Journal of Tribology, 148(2). https://doi.org/10.1115/1.4068991

Vancouver

Zawadzki P, Rybarczyk J, Patalas A, Wierzbicka N, Łabudzki R, Diana B, et al. Tribological Properties of Fused Deposition Modeling-Printed Polylactic Acid and PLA-CF: Extrusion Temperature and Internal Structure. Journal of Tribology. 2026;148(2). doi:10.1115/1.4068991

BibTeX
@article{Zawadzki2026,
  author = {Zawadzki, Paweł and Rybarczyk, Justyna and Patalas, Adam and Wierzbicka, Natalia and Łabudzki, Remigiusz and Diana, Băilă and Igor, Fodchuk and Mirian, Bonilla},
  title = {Tribological Properties of Fused Deposition Modeling-Printed Polylactic Acid and PLA-CF: Extrusion Temperature and Internal Structure},
  journal = {Journal of Tribology},
  year = {2026},
  volume = {148},
  number = {2},
  doi = {10.1115/1.4068991}
}
Kostenlos starten →