Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments
Polymers · 14.01.2025 · 17 (2) · 191
DOI: 10.3390/polym17020191 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 14.01.2025. Verfasst von Ioan Plamadiala und 3 weiteren Autor:innen. Beteiligte Einrichtung: Materials Engineering and Welding Department, Transilvania University of Brasov, 500036 Brasov, Romania. Die Arbeit wurde bisher 184-mal zitiert (Crossref) und nennt 171 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This review explores the impact of various additives on the mechanical properties of polylactic acid (PLA) filaments used in Fused Deposition Modeling (FDM) 3D printing. While PLA is favored for its biodegradability and ease of use, its inherent limitations in strength and heat resistance necessitate enhancements through additives. The impact of natural and synthetic fibers, inorganic particles, and nanomaterials on the mechanical properties, printability, and overall functionality of PLA composites was examined, indicating that fiber reinforcements, such as carbon and glass fibers, significantly enhance tensile strength and stiffness, while natural fibers contribute to sustainability but may compromise mechanical stability. Additionally, the inclusion of inorganic particulate fillers like calcium carbonate improves dimensional stability and printability, although larger particles can lead to agglomeration issues. The study highlights the potential for improved performance in specific applications while acknowledging the need for further investigation into optimal formulations and processing conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Engineering and Welding Department, Transilvania University of Brasov, 500036 Brasov, Romania.
- Department of Materials Science, Transilvania University of Brasov, 500036 Brasov, Romania.
ORCID-Profile: Catalin Croitoru, Mihai Alin Pop
Zitieren
APA
Plamadiala, I., Croitoru, C., Pop, M. A., & Roata, I. C. (2025). Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments. Polymers, 17(2), 191. https://doi.org/10.3390/polym17020191
Vancouver
Plamadiala I, Croitoru C, Pop MA, Roata IC. Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments. Polymers. 2025;17(2):191. doi:10.3390/polym17020191
BibTeX
@article{Plamadiala2025,
author = {Plamadiala, Ioan and Croitoru, Catalin and Pop, Mihai Alin and Roata, Ionut Claudiu},
title = {Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments},
journal = {Polymers},
year = {2025},
volume = {17},
number = {2},
pages = {191},
doi = {10.3390/polym17020191}
}
EUVIMED