EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Characterization of Fused Deposition Modeling‐Printed Wood‐Polylactic Acid Composites Under Water Conditioning

Weilong Xu, Meiyu Li, Yanan Xu, Ali Entezari, Jianguang Fang

Polymer Composites · 20.03.2026 · 47 (6) · 5205-5221

DOI: 10.1002/pc.70484 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 26.09.2025. Verfasst von Weilong Xu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural fiber‐reinforced thermoplastic composites have gained increasing attention due to their sustainability. Additive manufacturing, particularly Fused Deposition Modeling (FDM), enables the fabrication of such composites with complex geometries. This study investigates the mechanical behavior of wood‐polylactic acid (PLA) composites fabricated via FDM, focusing on their tensile and fracture properties under different water absorption durations. Results indicate that wood‐PLA exhibits reduced tensile strength and stiffness compared to pure PLA. The tensile strength for wood‐PLA was 23.4 MPa, which was significantly lower than the strength of the PLA (54.6 MPa). However, the wood‐PLA showed enhanced strain energy density in the tensile test, measuring 1.41 times greater than the PLA, and higher energy absorption ability in the Single Edged Notched Bending (SENB) test. Water uptake induced plasticisation effects in the wood‐PLA composites, resulting in a 20% reduction in strength and a 10% decrease in elastic modulus after 15 days. Moreover, elongation at break increased by 66%, contributing to a 48% improvement in energy absorption. Notably, these effects are reversible upon redrying, suggesting that water primarily acts as an external plasticizer. The study highlights the mechanical response of wood‐PLA composites and provides insights into their structural integrity in humid environments.

Förderung

  • Australian Research Council

Zitieren

APA

Xu, W., Li, M., Xu, Y., Entezari, A., & Fang, J. (2026). Mechanical Characterization of Fused Deposition Modeling‐Printed Wood‐Polylactic Acid Composites Under Water Conditioning. Polymer Composites, 47(6), 5205-5221. https://doi.org/10.1002/pc.70484

Vancouver

Xu W, Li M, Xu Y, Entezari A, Fang J. Mechanical Characterization of Fused Deposition Modeling‐Printed Wood‐Polylactic Acid Composites Under Water Conditioning. Polymer Composites. 2026;47(6):5205-5221. doi:10.1002/pc.70484

BibTeX
@article{Xu2026,
  author = {Xu, Weilong and Li, Meiyu and Xu, Yanan and Entezari, Ali and Fang, Jianguang},
  title = {Mechanical Characterization of Fused Deposition Modeling‐Printed Wood‐Polylactic Acid Composites Under Water Conditioning},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {6},
  pages = {5205--5221},
  doi = {10.1002/pc.70484}
}
Kostenlos starten →