EUVIMEDEUVIMED entdecken
Vergleichsstudie

Flexural strength, surface roughness, and biofilm formation of ceramic‐reinforced PEEK: An in vitro comparative study

Lolowh Almogbel, Ramtin Sadid-Zadeh iD, Ahmet Örgev iD, Gülce Çakmak, Rui Li iD

Journal of Prosthodontics · 2025

DOI: 10.1111/jopr.13815 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Journal of Prosthodontics, 2025. Verfasst von Lolowh Almogbel und 4 weiteren Autor:innen. Beteiligte Einrichtung: Restorative and Prosthetic Dental Sciences Department, College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Ar…. Hauptthemen laut MEDLINE: Polyethylene Glycols, Biofilms, Ketones, Flexural Strength. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 53 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This in vitro study aimed to compare flexural strength, surface roughness, and biofilm formation of ceramic‐reinforced polyetheretherketone (PEEK) with conventionally heat‐compressed and milled polymethylmethacrylate (PMMA) denture base materials. Materials and Methods Thirty strips (6.4 mm × 10 mm × 3 mm) and 30 discs (10 mm × 1 mm) were fabricated from a heat‐compressed PMMA, milled PMMA, and ceramic‐reinforced PEEK, 10 each. One surface of each sample was polished to mimic the laboratory procedure for denture base materials. Strips were then subjected to a three‐point bend test using a universal testing machine at a crosshead speed of 5.0 mm/min. An optical profilometer was used to assess the Ra value (mm) of the discs on polished and unpolished sides. Biofilm formation behavior was analyzed by measuring the colony‐forming unit (CFU)/mL of Candida albicans on the unpolished surface of the discs. One‐way ANOVA followed by Tukey multiple comparison tests were used to compare the flexural strength, Ra value, and biofilm formation of the studied materials ( a = 0.05).

Results

Ceramic‐reinforced PEEK showed significantly higher flexural strength (178.2 ± 3.2 MPa) than milled PMMA (89.6 ± 0.8 MPa; p < 0.001) and heat‐compressed PMMA (67.3 ± 5.3 MPa; p < 0.001). Ceramic‐reinforced PEEK exhibited a significantly higher Ra value than the other groups on unpolished sides; however, the polishing process significantly reduced the Ra values of all studied groups ( p < 0.05). There was no significant difference in C. albicans adhesion among the groups ( p < 0.05).

Conclusion

The flexural strength of tested materials was within acceptable limits for clinical use as a denture base material. Ceramic‐reinforced PEEK had the highest surface roughness; however, its similarity in biofilm formation to other groups indicates its clinical acceptability as denture base material.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polyethylene GlycolsBiofilmsKetonesFlexural StrengthCeramicsDenture BasesDental MaterialsBenzophenonesSurface PropertiesPolymethyl MethacrylatePolymersMaterials TestingCandida albicansIn Vitro TechniquesDental Stress Analysis

Stichwörter der Autor:innen

biofilm formationceramic‐reinforced PEEKflexural strengthsurface roughness

Substanzen

BenzophenonesPolyethylene GlycolspolyetheretherketoneKetonesPolymethyl MethacrylatePolymersDental Materials

Autor:innen und Institutionen

  • Restorative and Prosthetic Dental Sciences Department, College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia.
  • King Abdullah International Medical Research Centre, Ministry of National Guard Health Affairs, Riyadh, Saudi Arabia.
  • Department of Restorative Sciences, School of Dentistry, Birmingham, Alabama, USA.
  • Department of Restorative Dentistry, School of Dental Medicine, University at Buffalo, Buffalo, New York, USA.
  • Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, Bern, Switzerland.

ORCID-Profile: Ramtin Sadid-Zadeh, Ahmet Örgev, Rui Li

Zitieren

APA

Almogbel, L., Sadid-Zadeh, R., Örgev, A., Çakmak, G., & Li, R. (2025). Flexural strength, surface roughness, and biofilm formation of ceramic‐reinforced PEEK: An in vitro comparative study. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13815

Vancouver

Almogbel L, Sadid-Zadeh R, Örgev A, Çakmak G, Li R. Flexural strength, surface roughness, and biofilm formation of ceramic‐reinforced PEEK: An in vitro comparative study. Journal of Prosthodontics. 2025. doi:10.1111/jopr.13815

BibTeX
@article{Almogbel2025,
  author = {Almogbel, Lolowh and Sadid-Zadeh, Ramtin and Örgev, Ahmet and Çakmak, Gülce and Li, Rui},
  title = {Flexural strength, surface roughness, and biofilm formation of ceramic‐reinforced PEEK: An in vitro comparative study},
  journal = {Journal of Prosthodontics},
  year = {2025},
  doi = {10.1111/jopr.13815}
}
Kostenlos starten →