EUVIMEDDescoperă EUVIMED
Open access · CC BY 4.0

Advanced 3D Insights Into the Marginal and Internal Fit of Ceramic‐Filled Hybrid Endocrowns With Variable Preparations

Izim Turker Kader iD, Safa Ozer, Burcin Arican

Journal of Esthetic and Restorative Dentistry · 2025

DOI: 10.1111/jerd.13453 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, 2025. Written by Izim Turker Kader and 2 co-authors. Institution: Bahçeşehir University School of Dental Medicine, Department of Prosthodontics, Istanbul, Turkey. Major MEDLINE topics: Printing, Three-Dimensional, Ceramics, Dental Prosthesis Design, Crowns. Cited 7 times so far (Crossref); 42 references. The full text is freely available (open access, CC BY 4.0).

RezumatSubjectsDate bibliograficeCiteRelated studies

Abstract (original language)

Objective

This study aims to evaluate the influence of different preparation designs on the marginal and internal fit of 3D‐printed permanent endocrowns using circumferential 3D analysis. Materials and Methods Maxillary right first molar typodont teeth were prepared with four designs ( n = 12); Group 1‐butt joint & 2 mm pulp chamber, Group 2‐butt joint & 4 mm pulp chamber, Group 3‐shoulder & 2 mm pulp chamber, and Group 4‐shoulder & 4 mm pulp chamber. Teeth were scanned, replicated as 3D‐printed master dies, and restored with 3D‐printed ceramic‐filled hybrid endocrowns. After seating with Fit Checker, superimposed scans were analyzed circumferentially at standard points. Marginal, internal, pulp chamber, and overall gap values were measured from mesiodistal, buccolingual, and oblique sections. Statistical analysis was performed using two‐way anova and post hoc Tukey tests ( α = 0.05).

Results

Margin design and pulp chamber depth interactions revealed significant differences ( p < 0.05). The least marginal fit was in Group 2, while the best internal and overall fit was in Group 3 ( p < 0.05).

Conclusion

Different preparation designs have an impact on the fit of endocrowns. A shoulder margin design and a 2‐mm pulp chamber depth exhibited a better internal fit of 3D‐printed ceramic‐filled hybrid endocrowns through circumferential 3D analysis. Clinical Significance Circumferential 3D analysis reveals that variable preparation designs significantly influence the fit of endocrowns, guiding clinicians in selecting optimal designs for improved clinical outcomes.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalCeramicsDental Prosthesis DesignCrownsDental Marginal AdaptationHumansMolar

Author keywords

dental materialsdental prosthesisdental prosthesis designthree‐dimensional printing

Authors and institutions

  • Bahçeşehir University School of Dental Medicine, Department of Prosthodontics, Istanbul, Turkey.
  • Bahçeşehir University Vocational School of Health Services, Dental Prosthetic Technology, Istanbul, Turkey.
  • Bahçeşehir University School of Dental Medicine, Department of Endodontics, Istanbul, Turkey.

ORCID profiles: Izim Turker Kader

Cite

APA

Turker Kader, I., Ozer, S., & Arican, B. (2025). Advanced 3D Insights Into the Marginal and Internal Fit of Ceramic‐Filled Hybrid Endocrowns With Variable Preparations. Journal of Esthetic and Restorative Dentistry. https://doi.org/10.1111/jerd.13453

Vancouver

Turker Kader I, Ozer S, Arican B. Advanced 3D Insights Into the Marginal and Internal Fit of Ceramic‐Filled Hybrid Endocrowns With Variable Preparations. Journal of Esthetic and Restorative Dentistry. 2025. doi:10.1111/jerd.13453

BibTeX
@article{TurkerKader2025,
  author = {Turker Kader, Izim and Ozer, Safa and Arican, Burcin},
  title = {Advanced 3D Insights Into the Marginal and Internal Fit of Ceramic‐Filled Hybrid Endocrowns With Variable Preparations},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2025},
  doi = {10.1111/jerd.13453}
}
Start for free →