EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel

Lorenz Engelking, Mauro Madia, Dirk Schröpfer, Julius Kruse, Romeo Saliwan Neumann, Thomas Kannengießer

Fatigue & Fracture of Engineering Materials & Structures · 2026-06 · 49 (6) · 2352-2362

DOI: 10.1111/ffe.70259 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 24.03.2026. Verfasst von Lorenz Engelking und 5 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The milling process significantly influences the surface integrity of metallic components through machining induced near‐surface residual stresses. Modern hybrid machining processes, such as ultrasonic‐assisted milling (USAM), offer the potential to induce beneficial near‐surface compressive residual stresses compared to the near‐surface tensile residual stresses typically resulting from conventional milling (CM). This study investigates the effects of USAM compared to CM on the near‐surface residual stress state and fatigue performance of a S355J2C low‐alloy steel. Milling experiments and subsequent rotating bending tests revealed that USAM significantly reduces cutting force by approximately 45% and induces near‐surface compressive residual stresses as low as −733 MPa. This leads to a significant improvement in fatigue strength estimated in approximately 34% compared to polished specimens and 11% compared to the CM. These findings highlight the potential of USAM to enhance the fatigue performance of components made of steel.

Zitieren

APA

Engelking, L., Madia, M., Schröpfer, D., Kruse, J., Neumann, R. S., & Kannengießer, T. (2026). Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel. Fatigue & Fracture of Engineering Materials & Structures, 49(6), 2352-2362. https://doi.org/10.1111/ffe.70259

Vancouver

Engelking L, Madia M, Schröpfer D, Kruse J, Neumann RS, Kannengießer T. Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(6):2352-2362. doi:10.1111/ffe.70259

BibTeX
@article{Engelking2026,
  author = {Engelking, Lorenz and Madia, Mauro and Schröpfer, Dirk and Kruse, Julius and Neumann, Romeo Saliwan and Kannengießer, Thomas},
  title = {Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  volume = {49},
  number = {6},
  pages = {2352--2362},
  doi = {10.1111/ffe.70259}
}
Kostenlos starten →