Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel
Fatigue & Fracture of Engineering Materials & Structures · 2026-06 · 49 (6) · 2352-2362
DOI: 10.1111/ffe.70259 ↗At a glance
Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2026-03-24. Written by Lorenz Engelking and 5 co-authors. 50 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
The milling process significantly influences the surface integrity of metallic components through machining induced near‐surface residual stresses. Modern hybrid machining processes, such as ultrasonic‐assisted milling (USAM), offer the potential to induce beneficial near‐surface compressive residual stresses compared to the near‐surface tensile residual stresses typically resulting from conventional milling (CM). This study investigates the effects of USAM compared to CM on the near‐surface residual stress state and fatigue performance of a S355J2C low‐alloy steel. Milling experiments and subsequent rotating bending tests revealed that USAM significantly reduces cutting force by approximately 45% and induces near‐surface compressive residual stresses as low as −733 MPa. This leads to a significant improvement in fatigue strength estimated in approximately 34% compared to polished specimens and 11% compared to the CM. These findings highlight the potential of USAM to enhance the fatigue performance of components made of steel.
Cite
APA
Engelking, L., Madia, M., Schröpfer, D., Kruse, J., Neumann, R. S., & Kannengießer, T. (2026). Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel. Fatigue & Fracture of Engineering Materials & Structures, 49(6), 2352-2362. https://doi.org/10.1111/ffe.70259
Vancouver
Engelking L, Madia M, Schröpfer D, Kruse J, Neumann RS, Kannengießer T. Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(6):2352-2362. doi:10.1111/ffe.70259
BibTeX
@article{Engelking2026,
author = {Engelking, Lorenz and Madia, Mauro and Schröpfer, Dirk and Kruse, Julius and Neumann, Romeo Saliwan and Kannengießer, Thomas},
title = {Influence of Ultrasonic‐Assisted Milling on Surface Integrity and Fatigue Strength of a Low Alloy Steel},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2026},
volume = {49},
number = {6},
pages = {2352--2362},
doi = {10.1111/ffe.70259}
}
EUVIMED