EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Relation Between Polished Surface Integrity and Fatigue Behavior of Low-Alloy Steel

Yong Wang iD, Yang Xiao, Dongfei Wang, Xibin Wang, Zhibing Liu, Kun Xu

Materials · 24.03.2026 · 19 (7) · 1284

DOI: 10.3390/ma19071284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2026. Verfasst von Yong Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Basic product innovation Program of China, Shanxi Provincial Key Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fatigue pitting model based on the minimum oil film thickness does not consider the influence of tooth surface roughness and residual stress, which limits the accuracy of predicting the fatigue pitting of the model. Micro pitting often initiates on the surface due to large external loads. Therefore, it is urgent to propose a new-micro pitting bearing capacity model based on gear surface integrity parameters. This paper studied a new fatigue pitting model considering surface integrity subjected to polishing processes. This model thoroughly analyzes the effects of teeth surface roughness dynamically on the oil film pressure and explores the complex mechanism of residual stress in the near-surface stress field of the gear teeth. The new model can more accurately simulate the micro-pitting bearing capacity under actual operating conditions by introducing teeth surface roughness and residual stress, and the prediction reliability of gear steel is greatly improved. This improved model provides a solid theoretical basis and technical support for optimizing gear transmission systems, accurate diagnosis of micro-pitting defects, and in-depth theoretical research in related fields.

Schlagwörter

Stichwörter der Autor:innen

gear steelmicro pitting fatigueresidual stresssurface roughness

Autor:innen und Institutionen

  • College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
  • Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing 100081, China.
  • Jinxi Axle Company Limited, Taiyuan 030024, China.
  • Zhengzhou Research Institute of Mechanical Engineering Co., Ltd., Zhengzhou 477150, China.

ORCID-Profile: Yong Wang

Förderung

  • National Natural Science Foundation of China
  • Basic product innovation Program of China
  • Shanxi Provincial Key Laboratory
  • Shanxi Provincial Key Research and Development Project
  • Shanxi Provincial Fundamental Research Program
  • Mongolia Autonomous Region Science and Technology Major Special Project

Zitieren

APA

Wang, Y., Xiao, Y., Wang, D., Wang, X., Liu, Z., & Xu, K. (2026). Study on the Relation Between Polished Surface Integrity and Fatigue Behavior of Low-Alloy Steel. Materials, 19(7), 1284. https://doi.org/10.3390/ma19071284

Vancouver

Wang Y, Xiao Y, Wang D, Wang X, Liu Z, Xu K. Study on the Relation Between Polished Surface Integrity and Fatigue Behavior of Low-Alloy Steel. Materials. 2026;19(7):1284. doi:10.3390/ma19071284

BibTeX
@article{Wang2026,
  author = {Wang, Yong and Xiao, Yang and Wang, Dongfei and Wang, Xibin and Liu, Zhibing and Xu, Kun},
  title = {Study on the Relation Between Polished Surface Integrity and Fatigue Behavior of Low-Alloy Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1284},
  doi = {10.3390/ma19071284}
}
Kostenlos starten →