EUVIMEDEUVIMED entdecken
Crossref

A Triangular Pyramid Geometry-Guided Hand–Eye Calibration Framework for Line Laser Cameras With Constrained Optimization

Yingxiong Wang, Jianliang Mao, Zhiyong Dai, Fei Xia, Chuanlin Zhang, Huaicheng Yan

IEEE Transactions on Automation Science and Engineering · 2026 · 23 · 9720-9733

DOI: 10.1109/tase.2026.3693129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Automation Science and Engineering, 2026. Verfasst von Yingxiong Wang und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hand-eye calibration of line laser cameras (LLCs) is a prerequisite for accurate 3D measurement and reliable welding path execution in robotic welding systems. However, calibration methods based on planar or spherical targets often exhibit fitting ambiguity, sensitivity to illumination variations, and limited robustness under industrial operating conditions. To address these limitations, this paper presents a novel hand–eye calibration framework guided by the geometry of a triangular pyramid target for LLCs. By exploiting the surface normal discontinuities of the triangular pyramid, the proposed approach induces stable and unique laser extremum features during scanning, enabling consistent feature extraction and well-posed geometric calibration constraints. Under these constraints, the hand-eye transformation is formulated as a constrained optimization problem and solved using sequential least squares quadratic programming (SLSQP), which enforces rotational orthogonality and bounded translation. Experiments on a real robotic welding system show that the proposed method achieves a calibration error of 0.648 mm based on the bootstrap 95% confidence analysis, and maintains reliable performance across both comparative and field evaluations. Note to Practitioners—Hand-eye calibration is a critical prerequisite for line laser camera-equipped robotic welding systems, as calibration errors directly affect seam localization accuracy and path execution reliability. In industrial practice, planar or spherical calibration targets often suffer from ambiguous feature extraction, sensitivity to illumination conditions, and limited repeatability. This paper presents a practical hand-eye calibration framework based on a triangular pyramid calibration target and constrained optimization. The sharp geometric discontinuities of the pyramid generate stable and unique laser extremum features, simplifying feature extraction without complex surface fitting or manual selection. By enforcing rotation orthogonality and bounded translation through an SLSQP-based optimization scheme, the method yields physically consistent and numerically stable calibration results. The approach is easy to deploy using low-cost targets and commercial off-the-shelf line laser cameras, and is well suited to eye-in-hand welding and other industrial applications operating in harsh, unstructured environments.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Y., Mao, J., Dai, Z., Xia, F., Zhang, C., & Yan, H. (2026). A Triangular Pyramid Geometry-Guided Hand–Eye Calibration Framework for Line Laser Cameras With Constrained Optimization. IEEE Transactions on Automation Science and Engineering, 23, 9720-9733. https://doi.org/10.1109/tase.2026.3693129

Vancouver

Wang Y, Mao J, Dai Z, Xia F, Zhang C, Yan H. A Triangular Pyramid Geometry-Guided Hand–Eye Calibration Framework for Line Laser Cameras With Constrained Optimization. IEEE Transactions on Automation Science and Engineering. 2026;23:9720-9733. doi:10.1109/tase.2026.3693129

BibTeX
@article{Wang2026,
  author = {Wang, Yingxiong and Mao, Jianliang and Dai, Zhiyong and Xia, Fei and Zhang, Chuanlin and Yan, Huaicheng},
  title = {A Triangular Pyramid Geometry-Guided Hand–Eye Calibration Framework for Line Laser Cameras With Constrained Optimization},
  journal = {IEEE Transactions on Automation Science and Engineering},
  year = {2026},
  volume = {23},
  pages = {9720--9733},
  doi = {10.1109/tase.2026.3693129}
}
Kostenlos starten →