Research on hand-eye calibration method of laser profilometer based on two-step method
Optics and Precision Engineering · 2025 · 33 (2) · 176-183
DOI: 10.37188/ope.20253302.0176 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics and Precision Engineering, 2025. Verfasst von Li DENG und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).
Abstract (Originalsprache)
: In order to improve the accuracy of hand - eye calibration in the cooperative operation between line laser profilers and robots , a calibration method based on the two - step method was proposed. The method utilized a commonly available calibration sphere as the calibration object , and constructed the solu⁃ tion equations according to the characteristic of the sphere center coordinates being constant in the robot co⁃ ordinate system. By changing the attitude once and translating once in a special measurement way , the di⁃ rection and position matrices were solved independently by associating the solution equations in different at⁃ titudes. The experimental results show that the standard deviations of the spherical center coordinates in the X and Y directions of the two - step method are 0. 324 9 mm and 0. 246 2 mm , respectively , which are 29. 5% and 61. 5% higher than those of the one - step method of 0. 460 8 mm and 0. 639 1 mm , respective⁃
Zitieren
APA
DENG, L., ZHANG, Y., LIU, G., ZHANG, Y., & MIAO, Y. (2025). Research on hand-eye calibration method of laser profilometer based on two-step method. Optics and Precision Engineering, 33(2), 176-183. https://doi.org/10.37188/ope.20253302.0176
Vancouver
DENG L, ZHANG Y, LIU G, ZHANG Y, MIAO Y. Research on hand-eye calibration method of laser profilometer based on two-step method. Optics and Precision Engineering. 2025;33(2):176-183. doi:10.37188/ope.20253302.0176
BibTeX
@article{DENG2025,
author = {DENG, Li and ZHANG, Yilian and LIU, Gang and ZHANG, Yue and MIAO, Yuqi},
title = {Research on hand-eye calibration method of laser profilometer based on two-step method},
journal = {Optics and Precision Engineering},
year = {2025},
volume = {33},
number = {2},
pages = {176--183},
doi = {10.37188/ope.20253302.0176}
}
EUVIMED