EUVIMEDEUVIMED entdecken
Crossref

Extracellular Matrix-Inspired Electrospun Nanofiber-Coated 3D-Printed Polylactic Acid Scaffolds for Bone Regeneration

Kajal Goswami, Priyanka Dagar, Ankita Negi, Sumit Murab, Garima Agrawal

ACS Applied Polymer Materials · 14.08.2026 · 8 (15) · 12563-12577

DOI: 10.1021/acsapm.6c01638 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 04.08.2026. Verfasst von Kajal Goswami und 4 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: Indian Institute of Technology Mandi, Science and Engineering Research Board, Department of Science and Technology, Ministry of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three dimensional (3D)-printed polylactic acid (PLA) scaffolds have gained significant attention for bone tissue regeneration due to their excellent biocompatibility, tunable architecture, and mechanical strength. However, the hydrophobic and bioinert surface of PLA limits its interaction with cells. To overcome these limitations, in this study, a multistep surface modification strategy is employed by combining 3D printing and electrospinning techniques. Here, 3D-printed PLA scaffolds are first treated with oxygen plasma to generate OPLA scaffolds with enhanced hydrophilicity, followed by coating with alginate (Alg)/poly(ethylene oxide) (PEO)-based electrospun nanofibers incorporated with magnesium phosphate nanoparticles (MP NPs) to develop Alg/PEO/MP/OPLA scaffold. Here, an extracellular matrix (ECM)-inspired electrospun nanofibrous coating provides a biomimetic surface for cell attachment, while poly(ethylene oxide) (PEO) improves the electrospinnability of alginate to obtain uniform nanofibers. Additionally, incorporation of MP NPs in nanofibers offers bioactive cues associated with osteogenic stimulation for bone regeneration. The successful coating of electrospun nanofibers on 3D-printed scaffolds is confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and field emission scanning electron microscopy (FE-SEM). Subsequent in situ mineralization results in calcium phosphate (CaP) deposition on the scaffold (Alg/MP/OPLA/CaP), as confirmed by ATR-FTIR, X-ray diffraction (XRD), and FE-SEM analysis. Further, in vitro cell studies demonstrate that the presence of MP NPs in Alg/MP/OPLA/CaP scaffold significantly improves cell attachment and proliferation over time, combined with enhancement in osteogenic activity. Overall, the developed Alg/MP/OPLA/CaP scaffold provides a bioactive environment for bone regeneration, thus serving as a potential alternative for the repair of critical-sized bone defects.

Förderung

  • Indian Institute of Technology Mandi
  • Science and Engineering Research Board
  • Department of Science and Technology, Ministry of Science and Technology, India
  • IIT Mandi iHub and HCI Foundation

Zitieren

APA

Goswami, K., Dagar, P., Negi, A., Murab, S., & Agrawal, G. (2026). Extracellular Matrix-Inspired Electrospun Nanofiber-Coated 3D-Printed Polylactic Acid Scaffolds for Bone Regeneration. ACS Applied Polymer Materials, 8(15), 12563-12577. https://doi.org/10.1021/acsapm.6c01638

Vancouver

Goswami K, Dagar P, Negi A, Murab S, Agrawal G. Extracellular Matrix-Inspired Electrospun Nanofiber-Coated 3D-Printed Polylactic Acid Scaffolds for Bone Regeneration. ACS Applied Polymer Materials. 2026;8(15):12563-12577. doi:10.1021/acsapm.6c01638

BibTeX
@article{Goswami2026,
  author = {Goswami, Kajal and Dagar, Priyanka and Negi, Ankita and Murab, Sumit and Agrawal, Garima},
  title = {Extracellular Matrix-Inspired Electrospun Nanofiber-Coated 3D-Printed Polylactic Acid Scaffolds for Bone Regeneration},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {15},
  pages = {12563--12577},
  doi = {10.1021/acsapm.6c01638}
}
Kostenlos starten →