ZIF-8-coated 3D-printed PCL/ion-doped BCP scaffolds for enhanced bone regeneration
PLOS One · 11.06.2026 · 21 (6) · e0347048
DOI: 10.1371/journal.pone.0347048 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 11.06.2026. Verfasst von Vahid Khademi Ardakani und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biotechnology, Faculty of Biological Science and Technology, University of Isfahan, Isfahan, Iran. Hauptthemen laut MEDLINE: Bone Regeneration, Printing, Three-Dimensional, Polyesters, Tissue Scaffolds. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Large bone defects require bioactive, mechanically robust scaffolds for regeneration. This study developed 3D-printed polycaprolactone/biphasic calcium phosphate (PCL/BCP) composite scaffolds (35−45 wt% ion-doped BCP with Sr 2+ , Mg 2+ , and Si 4+ ) via fused deposition modeling (FDM), followed by in situ ZIF-8 coating. The optimal PCL + 40 wt.% ion-doped BCP formulation exhibited superior compressive strength (~30 MPa) and modulus (~ 0.4 GPa). Degradation in Phosphate-buffered saline (PBS) showed ~8% mass loss over 28 days with stable pH. Immersion in simulated body fluid (SBF) revealed rapid apatite formation and sustained release of Ca 2+ , P, Mg 2+ , Si 4+ , and Sr 2+ ions. SEM confirmed uniform nanoscale ZIF-8 deposition, enriching surfaces with Zn 2+ . In vitro assays with MG-63 cells and hBMSCs demonstrated that ZIF-8-coated scaffolds significantly enhanced cell adhesion, proliferation (MTT), cytoskeletal organization (DAPI/phalloidin), and mineralization (Alizarin Red S) compared to uncoated controls (p < 0.05). The synergistic integration of ion-doped BCP, 3D printing, and ZIF-8 coating yields a bioactive, biodegradable platform with excellent osteogenic potential for advanced bone tissue engineering.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Biotechnology, Faculty of Biological Science and Technology, University of Isfahan, Isfahan, Iran.
- Department of Nanotechnology, Faculty of Chemistry, University of Isfahan, Isfahan, Iran.
ORCID-Profile: Ghasem Dini
Zitieren
APA
Ardakani, V. K., Boroumand, N., Dini, G., Golabi, M., & Asl, M. A. (2026). ZIF-8-coated 3D-printed PCL/ion-doped BCP scaffolds for enhanced bone regeneration. PLOS One, 21(6), e0347048. https://doi.org/10.1371/journal.pone.0347048
Vancouver
Ardakani VK, Boroumand N, Dini G, Golabi M, Asl MA. ZIF-8-coated 3D-printed PCL/ion-doped BCP scaffolds for enhanced bone regeneration. PLOS One. 2026;21(6):e0347048. doi:10.1371/journal.pone.0347048
BibTeX
@article{Ardakani2026,
author = {Ardakani, Vahid Khademi and Boroumand, Niloufar and Dini, Ghasem and Golabi, Mohsen and Asl, Maryam Abdollahi},
title = {ZIF-8-coated 3D-printed PCL/ion-doped BCP scaffolds for enhanced bone regeneration},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {6},
pages = {e0347048},
doi = {10.1371/journal.pone.0347048}
}
EUVIMED