In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration
Journal of Functional Biomaterials · 12.06.2025 · 16 (6) · 218
DOI: 10.3390/jfb16060218 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 12.06.2025. Verfasst von Eddy Shan und 9 weiteren Autor:innen. Beteiligte Einrichtung: Section of Periodontology, Faculty of Odontology, Complutense University of Madrid, 28040 Madrid, Spain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: COLFEED4Print S.L., Spanish Centre for the Development of Industrial Technology (CDTI), Comunidad de Madrid for “Atracción de Talento”.
Abstract (Originalsprache)
This study evaluated the biological performance in vitro of two 3D-printed hydroxyapatite (HA) and polylactic acid (PLA) composite scaffolds with two different infill densities (50% [HA-PLA50] and 70% [HA-PLA70]). Comparative analysis using MG-63 cell cultures evaluated the following: (1) integrity after exposure to various sterilization methods; (2) cell viability; (3) morphological characteristics; (4) cell proliferation; (5) cytotoxicity; (6) gene expression; and (7) protein synthesis. Ultraviolet radiation was the preferred sterilization method. Both scaffolds maintained adequate cell viability and proliferation over 7 days without significant differences in cytotoxicity. Notably, HA-PLA50 scaffolds demonstrated superior osteogenic potential, showing a significantly higher expression of collagen type I (COL1A1) and an increased synthesis of interleukins 6 and 8 (IL-6, IL-8) compared to HA-PLA70 scaffolds. While both scaffold types supported robust cell growth, the HA-PLA50 formulation exhibited enhanced bioactivity, suggesting a potential advantage for bone tissue engineering applications. These findings provide important insights for optimizing 3D-printed bone graft substitutes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Section of Periodontology, Faculty of Odontology, Complutense University of Madrid, 28040 Madrid, Spain.
- Etiology and Therapy of Periodontal and Peri-implant Diseases (ETEP) Research Group, Complutense University of Madrid, 28040 Madrid, Spain.
- Institute of Ceramics and Glass (ICV), Spanish National Research Council (CSIC), 28049 Madrid, Spain.
ORCID-Profile: Eddy Shan, Ana Ferrández-Montero, Rosa M Martin-Rodriguez, Begoña Ferrari, Antonio Javier Sanchez-Herencia, Leire Virto, Elena Figuero
Förderung
- COLFEED4Print S.L.
- Spanish Centre for the Development of Industrial Technology (CDTI)
- Comunidad de Madrid for “Atracción de Talento”
- ERDF/EU
Zitieren
APA
Shan, E., Chamorro, C., Ferrández-Montero, A., Martin-Rodriguez, R. M., Ferrari, B., Sanchez-Herencia, A. J., Virto, L., Marín, M. J., Figuero, E., & Sanz, M. (2025). In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration. Journal of Functional Biomaterials, 16(6), 218. https://doi.org/10.3390/jfb16060218
Vancouver
Shan E, Chamorro C, Ferrández-Montero A, Martin-Rodriguez RM, Ferrari B, Sanchez-Herencia AJ, et al. In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration. Journal of Functional Biomaterials. 2025;16(6):218. doi:10.3390/jfb16060218
BibTeX
@article{Shan2025,
author = {Shan, Eddy and Chamorro, Cristina and Ferrández-Montero, Ana and Martin-Rodriguez, Rosa M and Ferrari, Begoña and Sanchez-Herencia, Antonio Javier and Virto, Leire and Marín, María José and Figuero, Elena and Sanz, Mariano},
title = {In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration},
journal = {Journal of Functional Biomaterials},
year = {2025},
volume = {16},
number = {6},
pages = {218},
doi = {10.3390/jfb16060218}
}
EUVIMED