EUVIMEDEUVIMED entdecken
Crossref

Effect of different surface treatments on the bond strength between light-polymerized hard chairside relining material and computer-aided design and computer-aided manufacturing (CAD-CAM) milled denture base materials

Thi Khanh An Nguyen, Tamaki Hada, Maiko Iwaki, Masanao Inokoshi, Manabu Kanazawa

The Journal of Prosthetic Dentistry · 2026

DOI: 10.1016/j.prosdent.2026.01.024 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2026. Verfasst von Thi Khanh An Nguyen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Graduate student, Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Yushima, Bunkyo,…. Hauptthemen laut MEDLINE: Computer-Aided Design, Denture Bases, Dental Bonding, Dental Materials. Die Arbeit nennt 70 Literaturangaben. Gefördert von: Japan Science and Technology Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: A chairside light-polymerized hard relining material has been developed to overcome the limitations of autopolymerizing resins that include the exothermic reaction, odor, and prolonged polymerization time. However, its adhesion to computer-aided design and computer-aided manufacturing (CAD-CAM) denture base materials remains unclear. PURPOSE: The purpose of this in vitro study was to evaluate the tensile bond strength between a chairside light-polymerized hard relining material and 5 CAD-CAM milled denture base materials subjected to different surface treatments both before and after thermal cycling. MATERIAL AND METHODS: The CAD-CAM milled disk materials included an autopolymerized Fit Resin (FR) poured into a disk-shaped mold and 4 prefabricated disk materials: Ivotion Base (IB), M-PM Disk (MPM), Denture Disk (DD), and KZR-CAD Denture PC (KZR). Specimens (15×15×10 mm) were prepared and divided into 3 surface treatment groups: no treatment (NT), bur roughening (BR) using a flame-shaped crosscut tungsten carbide bur, and airborne-particle abrasion (AA) with 50-μm Al₂O₃. The relining material (HIKARELINER) was applied with its corresponding adhesive and light polymerized according to the manufacturer's instructions. The specimens were stored in distilled water at 37 °C for 24 hours or subjected to 10 000 thermal cycles between 5 and 55 °C. Tensile bond strength was tested in a universal testing machine, and failure modes were examined microscopically. Data were analyzed using 2-way ANOVA and Bonferroni-adjusted comparisons (α=.05). RESULTS: IB exhibited the lowest initial bond strength (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer-Aided DesignDenture BasesDental BondingDental MaterialsDenture LinersDenture DesignSurface PropertiesTensile StrengthPolymerizationMaterials TestingDental Stress Analysis

Substanzen

Dental Materials

Autor:innen und Institutionen

  • Graduate student, Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Yushima, Bunkyo, Tokyo, Japan.
  • Assistant Professor, Oral Devices and Materials, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Yushima, Bunkyo, Tokyo, Japan; and Assistant Professor, Oral Science Center, Institute of Biom…
  • Associate Professor, Digital Dentistry, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Yushima, Bunkyo, Tokyo, Japan.
  • Professor, Oral Devices and Materials, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Yushima, Bunkyo, Tokyo, Japan; and Professor, Oral Science Center, Institute of Biomedical Engineering,…
  • Professor, Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Yushima, Bunkyo, Tokyo, Japan; and Visiting Guest Professor, University of Zurich, 11 Platten…

Förderung

  • Japan Science and Technology Agency

Zitieren

APA

Nguyen, T. K. A., Hada, T., Iwaki, M., Inokoshi, M., & Kanazawa, M. (2026). Effect of different surface treatments on the bond strength between light-polymerized hard chairside relining material and computer-aided design and computer-aided manufacturing (CAD-CAM) milled denture base materials. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2026.01.024

Vancouver

Nguyen TKA, Hada T, Iwaki M, Inokoshi M, Kanazawa M. Effect of different surface treatments on the bond strength between light-polymerized hard chairside relining material and computer-aided design and computer-aided manufacturing (CAD-CAM) milled denture base materials. The Journal of Prosthetic Dentistry. 2026. doi:10.1016/j.prosdent.2026.01.024

BibTeX
@article{Nguyen2026,
  author = {Nguyen, Thi Khanh An and Hada, Tamaki and Iwaki, Maiko and Inokoshi, Masanao and Kanazawa, Manabu},
  title = {Effect of different surface treatments on the bond strength between light-polymerized hard chairside relining material and computer-aided design and computer-aided manufacturing (CAD-CAM) milled denture base materials},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2026},
  doi = {10.1016/j.prosdent.2026.01.024}
}
Kostenlos starten →