Effects of print orientation and artificial aging on the flexural strength and flexural modulus of 3D printed restorative resin materials
The Journal of Prosthetic Dentistry · 2025-05 · 133 (5) · 1345-1357
DOI: 10.1016/j.prosdent.2024.08.008 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2025-05. Verfasst von Shaymaa Mudhaffer und 3 weiteren Autor:innen. Beteiligte Einrichtung: Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, England, UK. Electronic address: S.mudhaffer@Taibahu.edu.sa. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Flexural Strength, Dental Materials, Composite Resins. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Manchester Metropolitan University, Saudi Arabian Cultural Bureau.
Abstract (Originalsprache)
STATEMENT OF PROBLEM: The integration of computer-aided design and computer-aided manufacture (CAD-CAM) technology has revolutionized restorative dentistry, offering both additive and subtractive manufacturing methods. Despite extensive research on 3-dimensionally (3D) printed materials, uncertainties remain regarding the impact of print orientation on their mechanical properties, especially for definitive resin materials, necessitating further investigation to ensure clinical efficacy. PURPOSE: The purpose of this in vitro study was to investigate the influence of print orientation and artificial aging on the flexural strength (FS) and flexural modulus (FM) of 3D printed resin materials indicated for definitive and interim restorations. MATERIAL AND METHODS: Specimens (2×2×25 mm) were additively manufactured in 3 orientations (0, 45, and 90 degrees) using five 3D printed resins: VarseoSmile Crownplus (VCP), Crowntec (CT), Nextdent C&B MFH (ND), Dima C&B temp (DT), and GC temp print (GC). A DLP 3D printer (ASIGA MAX UV) was used with postprocessing parameters as per the manufacturer recommendations. FS and FM were tested after storage in distilled water (DW) and artificial saliva (AS) for 24 hours, 1 month, and 3 months at 37 °C. Additional 2×2×16-mm specimens printed at 90 degrees were compared with the milled materials Lava Ultimate (LU) and Telio CAD (TC) after 24 hours of storage in AS at 37 °C (n=10). Measurements were conducted using a universal testing machine (Z020; Zwick/Roell) following the International Organization for Standardization (ISO) 4049 standard. Multiple way ANOVA, 1-way ANOVA, and Tukey HSD post hoc tests (α=.05) were used to analyze the data. RESULTS: Print orientation significantly influenced the FS and FM of 3D printed resin materials, with the 90-degree orientation exhibiting superior mechanical properties (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, England, UK. Electronic address: S.mudhaffer@Taibahu.edu.sa.
- Department of Engineering, Manchester Metropolitan University, Manchester, England, UK.
- Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, England, UK.
- Full Professor, Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, England, UK.
Förderung
- Manchester Metropolitan University
- Saudi Arabian Cultural Bureau
Zitieren
APA
Mudhaffer, S., Haider, J., Satterthwaite, J., & Silikas, N. (2025). Effects of print orientation and artificial aging on the flexural strength and flexural modulus of 3D printed restorative resin materials. The Journal of Prosthetic Dentistry, 133(5), 1345-1357. https://doi.org/10.1016/j.prosdent.2024.08.008
Vancouver
Mudhaffer S, Haider J, Satterthwaite J, Silikas N. Effects of print orientation and artificial aging on the flexural strength and flexural modulus of 3D printed restorative resin materials. The Journal of Prosthetic Dentistry. 2025;133(5):1345-1357. doi:10.1016/j.prosdent.2024.08.008
BibTeX
@article{Mudhaffer2025,
author = {Mudhaffer, Shaymaa and Haider, Julfikar and Satterthwaite, Julian and Silikas, Nick},
title = {Effects of print orientation and artificial aging on the flexural strength and flexural modulus of 3D printed restorative resin materials},
journal = {The Journal of Prosthetic Dentistry},
year = {2025},
volume = {133},
number = {5},
pages = {1345--1357},
doi = {10.1016/j.prosdent.2024.08.008}
}
EUVIMED