Evaluation of the relationship between metallurgical properties and metal-ceramic bond characteristics of Co-Cr alloys manufactured by different techniques
The Journal of Prosthetic Dentistry · 2023
DOI: 10.1016/j.prosdent.2023.09.005 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2023. Verfasst von Merve Cennet Altuntas und 1 weiteren Autor:innen. Beteiligte Einrichtung: Dental Specialist, Tacirler Education Foundation Sultanbeyli Oral and Dental Health Education and Research Hospital, Istanbul, Turkey. Electronic add…. Hauptthemen laut MEDLINE: Chromium Alloys, Dental Bonding. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Erciyes University Scientific Research Projects Coordination Unit, Erciyes Üniversitesi.
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Metal-ceramic restorations made from cobalt chromium (Co-Cr) alloy have been increasing, but studies on the effects of different manufacturing techniques on metal-ceramic interface characteristics and metal-ceramic bond strength are sparse. PURPOSE: The purpose of this in vitro study was to examine the metal-ceramic interface and the metal-ceramic bond strength of a Co-Cr alloy produced by casting, milling, and selective laser melting (SLM) with or without thermal cycling. MATERIAL AND METHODS: Co-Cr alloys were prepared by casting, milling, and SLM. Two different SLM devices were used. Ninety-six specimens (25×3×0.5 mm) were manufactured. The structure of the oxidation surface of Co-Cr specimens was examined by scanning electron microscopy (SEM) and by X-ray fluorescence spectroscopy (XRFS). After porcelain application, selected specimens were thermal cycled, and the strength of the metal-ceramic bond was measured by the 3-point bend test. All specimens were analyzed for failure type with a stereomicroscope. The elemental composition and morphology of the metal-ceramic interface were examined by XRFS and SEM with energy-dispersive X-ray (EDX). The results of bond strength were analyzed using a 2-way analysis of variance (ANOVA) for manufacturing methods and testing conditions and the Tukey honest significant difference (HSD) test (α=.05). RESULTS: The main effect of the interactions of the testing condition and manufacturing method variables on the bond strength variable was not statistically significantly different. No significant differences were found among the testing conditions tested (P=.638). Significant differences were found among the manufacturing methods tested statistically (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Dental Specialist, Tacirler Education Foundation Sultanbeyli Oral and Dental Health Education and Research Hospital, Istanbul, Turkey. Electronic address: mervecennetgundal@gmail.com.
- Professor, Erciyes University, Department of Prosthodontics, Faculty of Dentistry, Kayseri, Turkey.
Förderung
- Erciyes University Scientific Research Projects Coordination Unit
- Erciyes Üniversitesi
Zitieren
APA
Altuntas, M. C., & Guleryuz, A. (2023). Evaluation of the relationship between metallurgical properties and metal-ceramic bond characteristics of Co-Cr alloys manufactured by different techniques. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2023.09.005
Vancouver
Altuntas MC, Guleryuz A. Evaluation of the relationship between metallurgical properties and metal-ceramic bond characteristics of Co-Cr alloys manufactured by different techniques. The Journal of Prosthetic Dentistry. 2023. doi:10.1016/j.prosdent.2023.09.005
BibTeX
@article{Altuntas2023,
author = {Altuntas, Merve Cennet and Guleryuz, Aysegül},
title = {Evaluation of the relationship between metallurgical properties and metal-ceramic bond characteristics of Co-Cr alloys manufactured by different techniques},
journal = {The Journal of Prosthetic Dentistry},
year = {2023},
doi = {10.1016/j.prosdent.2023.09.005}
}
EUVIMED