EUVIMEDEUVIMED entdecken
Crossref

Recycling selective laser melting alloy powder on cobalt chromium-to-ceramic bond strength

Haydar Albayrak, Mustafa Ayata, Bilal Demirel

The Journal of Prosthetic Dentistry · 2023

DOI: 10.1016/j.prosdent.2023.08.008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2023. Verfasst von Haydar Albayrak und 2 weiteren Autor:innen. Beteiligte Einrichtung: Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, Erciyes University, Kayseri, Turkey. Hauptthemen laut MEDLINE: Dental Porcelain, Dental Bonding. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 39 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Reusing the powder in selective laser melting machines after multiple cycles is a cost-effective procedure for dental laboratories. However, information on the metal-ceramic bond strength of the framework fabricated by using recycled powder is lacking. PURPOSE: The purpose of this in vitro study was to investigate how the bonding agent and repeated alloy powder reuse affected the metal-ceramic bond strength of cobalt chromium frameworks fabricated by using selective laser melting. MATERIAL AND METHODS: Four square and 40-bar-shaped cobalt chromium frameworks were fabricated by selective laser melting. Half were produced by using virgin alloy powder (Group V; nsquare=2, nbar=20), and half with 30-times reused powder (Group R; nsquare=2, nbar=20). The particle size of each powder was measured by using scanning electron microscopy, and its phase composition was characterized by using radiograph diffraction. Each group was divided into 2 subgroups (Group W [Wash Opaque] and Group N [NP-Bond]) according to the brand of bonding agent used. After ceramic application, the metal-ceramic bond strengths were evaluated by using 3-point bend tests. The bonding agents' chemical composition was analyzed by using radiograph fluorescence. Bond strength data were analyzed by using a 2-way analysis of variance (α=.05). RESULTS: Mean ±standard deviation bond strengths did not differ significantly (P>.05) between Groups V (31.25 ±4.65) and R (30.88 ±4.78). Group W (35.34 ±1.78) had significantly higher bond strength than Group N (26.80 ±1.74; P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental PorcelainDental BondingPowdersCobaltChromiumMetal Ceramic AlloysChromium AlloysMaterials TestingCeramicsLasersSurface Properties

Substanzen

Dental PorcelainPowdersCobaltChromiumMetal Ceramic AlloysChromium Alloys

Autor:innen und Institutionen

  • Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, Erciyes University, Kayseri, Turkey.
  • Private practice, Dentos Oral and Dental Health Polyclinic, Kayseri, Turkey. Electronic address: dt.mustafaayata@gmail.com.
  • Professor, Department of Material Science and Engineering, Faculty of Engineering, Erciyes University, Kayseri, Turkey.

Zitieren

APA

Albayrak, H., Ayata, M., & Demirel, B. (2023). Recycling selective laser melting alloy powder on cobalt chromium-to-ceramic bond strength. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2023.08.008

Vancouver

Albayrak H, Ayata M, Demirel B. Recycling selective laser melting alloy powder on cobalt chromium-to-ceramic bond strength. The Journal of Prosthetic Dentistry. 2023. doi:10.1016/j.prosdent.2023.08.008

BibTeX
@article{Albayrak2023,
  author = {Albayrak, Haydar and Ayata, Mustafa and Demirel, Bilal},
  title = {Recycling selective laser melting alloy powder on cobalt chromium-to-ceramic bond strength},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2023},
  doi = {10.1016/j.prosdent.2023.08.008}
}
Kostenlos starten →