EUVIMEDEUVIMED entdecken
Crossref

Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study

Jianyu Chen, Jiaer Guo, Lijia Yang, Lin Wang, Xiao Zhang

The Journal of Prosthetic Dentistry · 2023

DOI: 10.1016/j.prosdent.2023.06.004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2023. Verfasst von Jianyu Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Assistant Professor, Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Guangdong Provincial Key Laboratory of…. Hauptthemen laut MEDLINE: Dental Implants. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangzhou Municipal Science and Technology Program key projects.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: A mesiodistal angle frequently forms between 2 splinted implant-supported, screw-retained fixed dental prostheses (TIS-FDPs). Mechanical complications commonly occur in prosthetic screws. Studies regarding the effect of the degree of implant angulation on the biomechanical performance of prosthetic screws in TIS-FDPs are sparse. PURPOSE: The purpose of this numerical and experimental study was to investigate the effects of different implant angulations on the biomechanical performance, including stress distribution, stability of the screw joint, and surface morphology change of the prosthetic screws in TIS-FDPs. MATERIAL AND METHODS: TIS-FDPs were classified into 4 groups: 0, 10, 20, and 30 degrees based on the degree of mesiodistal angle between the long axes of the 2 implants. In the finite element analysis (FEA), 4 series of 3D models were constructed and loaded with simulated occlusal forces. The von Mises stresses and rotational angles of the prosthetic screws were then calculated. In the mechanical test, each group of 5 TIS-FDPs with 10 prosthetic screws was tested under 1 million loading cycles by using a universal testing machine. The removal torque values (RTVs) and the surface roughness of the prosthetic screws were measured after cyclic loading. The normality of the outcome variables was assessed by the Shapiro-Wilk test. Analysis of variance and the Kruskal-Wallis test were used for further analysis (α=.05). RESULTS: The FEA results showed that the von Mises stresses of the prosthetic screws were concentrated in the first screw thread crest engaged with the abutment, and the maximum values of the threads and the rotation angles of the prosthetic screws increased in the 2-implant mesiodistal angulation from 0 to 30 degrees. The mechanical tests showed that the RTVs of the prosthetic screws in each group were not significantly different after 1 million loading cycles (P=.107). The surface roughness of the crest of the first 2 threads of the prosthetic screws in the 30-degree group changed significantly compared with those in the other groups. CONCLUSIONS: When TIS-FDPs were delivered, larger angulations of the 2 splinted implants seemed to increase the stress concentrated on the crest of the first engaged thread and the rotation angles of the prosthetic screws. After 1 million loading cycles, significant surface adhesive wear was identified on the crest of the first 2 threads of the prosthetic screws in the 30-degree group compared with groups with a smaller angulation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental ImplantsBone ScrewsTorqueDental Stress AnalysisDental Prosthesis, Implant-SupportedDental AbutmentsStress, MechanicalFinite Element Analysis

Substanzen

Dental Implants

Autor:innen und Institutionen

  • Assistant Professor, Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Guangdong Provincial Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou, PR China.
  • Graduate student, Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Guangdong Provincial Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou, PR China.
  • Graduate student, College of Stomatology, Jinan University, Guangzhou, PR China.
  • Associate Professor, Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Guangdong Provincial Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou, PR China. Electronic…
  • Engineer, Foshan Angels Biotechnology Co. Ltd, Foshan, PR China.

Förderung

  • National Natural Science Foundation of China
  • Guangzhou Municipal Science and Technology Program key projects

Zitieren

APA

Chen, J., Guo, J., Yang, L., Wang, L., & Zhang, X. (2023). Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2023.06.004

Vancouver

Chen J, Guo J, Yang L, Wang L, Zhang X. Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study. The Journal of Prosthetic Dentistry. 2023. doi:10.1016/j.prosdent.2023.06.004

BibTeX
@article{Chen2023,
  author = {Chen, Jianyu and Guo, Jiaer and Yang, Lijia and Wang, Lin and Zhang, Xiao},
  title = {Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2023},
  doi = {10.1016/j.prosdent.2023.06.004}
}
Kostenlos starten →