Evaluation of debonding force of screw-retained lithium disilicate implant-supported crowns cemented to abutments of different designs and surface treatments
The Journal of Prosthetic Dentistry · 2025
DOI: 10.1016/j.prosdent.2023.01.026 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift The Journal of Prosthetic Dentistry, 2025. Verfasst von Ahmed Abdel Latif Khalifa und 2 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate student, Clinical Master of Oral Implantology Program, Faculty of Dentistry, Alexandria University, Alexandria, Egypt. Hauptthemen laut MEDLINE: Crowns, Dental Porcelain, Dental Prosthesis, Implant-Supported, Dental Abutments. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben.
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Straight preparable abutments provide an alternative to titanium bases (Ti-bases) for single-unit screw-retained implant-supported restorations. However, the debonding force between crowns with a screw access channel cemented to preparable abutments and Ti-bases of different designs and surface treatments is unclear. PURPOSE: The purpose of this in vitro study was to compare the debonding force of screw-retained lithium disilicate implant-supported crowns cemented to straight preparable abutments and Ti-bases of different designs and surface treatments. MATERIAL AND METHODS: Forty laboratory implant analogs (Straumann Bone Level) were embedded into epoxy resin blocks that were randomly divided into 4 groups (n=10 each) according to the abutment type used: CEREC group, Variobase group, airborne-particle abraded Variobase group, and airborne-particle abraded straight preparable abutment group. All specimens were restored with lithium disilicate crowns and cemented with resin cement to the corresponding abutments. They were thermocycled (from 5 to 55 °C for 2000 cycles) followed by cyclic loading (120 000 cycles). The tensile forces required to debond the crowns from the corresponding abutments were measured (N) by using a universal testing machine. The Shapiro-Wilk test of normality was used. Comparison between the study groups was done with 1-way ANOVA (α=.05). RESULTS: Tensile debonding force values were significantly different according to the type of abutment used (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Postgraduate student, Clinical Master of Oral Implantology Program, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.
- Lecturer, Department of Prosthodontics, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.
- Professor and Chairman, Department of Prosthodontics, Faculty of Dentistry, Alexandria University, Alexandria, Egypt. Electronic address: moataz_khamis@yahoo.com.
Zitieren
APA
Latif Khalifa, A. A., Metwally, N. A., & Khamis, M. M. (2025). Evaluation of debonding force of screw-retained lithium disilicate implant-supported crowns cemented to abutments of different designs and surface treatments. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2023.01.026
Vancouver
Latif Khalifa AA, Metwally NA, Khamis MM. Evaluation of debonding force of screw-retained lithium disilicate implant-supported crowns cemented to abutments of different designs and surface treatments. The Journal of Prosthetic Dentistry. 2025. doi:10.1016/j.prosdent.2023.01.026
BibTeX
@article{LatifKhalifa2025,
author = {Latif Khalifa, Ahmed Abdel and Metwally, Nayrouz Adel and Khamis, Mohamed Moataz},
title = {Evaluation of debonding force of screw-retained lithium disilicate implant-supported crowns cemented to abutments of different designs and surface treatments},
journal = {The Journal of Prosthetic Dentistry},
year = {2025},
doi = {10.1016/j.prosdent.2023.01.026}
}
EUVIMED