EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of print parameters on the accuracy and fit of 3D-printed resin-based ceramic crowns

Jie Zhang, Shiwei Song, Kunjing Xu, Miao Liu, Ningning Liu, Fenglan Li, Shizhu Bai, Yimin Zhao

Dental Research · 2026

DOI: 10.1016/j.dtrs.2025.100004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dental Research, 2026. Verfasst von Jie Zhang und 7 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated the influence of print angle and layer thickness on the accuracy and fit of resin-based ceramic crowns fabricated using digital light processing (DLP). A mandibular first molar crown was virtually designed and then printed at two layer thicknesses (50 μm and 100 μm) and nine print angles (90°-270°). Accuracy was assessed by trueness, precision, and surface-resolved deviation metrics using 3D deviation analysis, whereas fit was evaluated with the triple-scan method. Both print angle and layer thickness significantly affected accuracy and fit ( P

Zitieren

APA

Zhang, J., Song, S., Xu, K., Liu, M., Liu, N., Li, F., Bai, S., & Zhao, Y. (2026). Effect of print parameters on the accuracy and fit of 3D-printed resin-based ceramic crowns. Dental Research. https://doi.org/10.1016/j.dtrs.2025.100004

Vancouver

Zhang J, Song S, Xu K, Liu M, Liu N, Li F, et al. Effect of print parameters on the accuracy and fit of 3D-printed resin-based ceramic crowns. Dental Research. 2026. doi:10.1016/j.dtrs.2025.100004

BibTeX
@article{Zhang2026,
  author = {Zhang, Jie and Song, Shiwei and Xu, Kunjing and Liu, Miao and Liu, Ningning and Li, Fenglan and Bai, Shizhu and Zhao, Yimin},
  title = {Effect of print parameters on the accuracy and fit of 3D-printed resin-based ceramic crowns},
  journal = {Dental Research},
  year = {2026},
  doi = {10.1016/j.dtrs.2025.100004}
}
Kostenlos starten →