EUVIMEDEUVIMED entdecken
Crossref

A colorimetric glucose sensor with gradient porous polyglycolic acid (PGA) microneedle array patch

Yunfan Zhang, Zifan Xue, Boyu Qin, Jiaze Wu, Jongho Park, Chensong Xu, Shengnan Shen, Hui Li, Beomjoon Kim

Biomedical Microdevices · 2026-06 · 28 (2)

DOI: 10.1007/s10544-026-00827-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Microdevices, online erschienen am 26.05.2026. Verfasst von Yunfan Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: The Institute of Technological Sciences, Wuhan University, Wuhan, 430072, China. Hauptthemen laut MEDLINE: Glucose, Needles, Polyglycolic Acid, Colorimetry. Die Arbeit nennt 40 Literaturangaben. Gefördert von: Department of Science and Technology of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid glucose detection holds significance to diabetes. Here, a novel colorimetric glucose sensor for interstitial fluid (ISF) glucose detection is proposed, comprising a gradient porous polyglycolic acid (PGA) microneedle array patch (MAP) for ISF extraction and a porous 3,3',5,5'-tetramethylbenzidine (TMB)-functionalized PGA film for glucose sensing. Instead of using pore-forming agents, porous PGA structure is fabricated by solvent volatility method, which brings the benefit of eliminating residual agents and enabling the formation of uniform, tunable micropores. PGA MAP was designed and fabricated with a gradient porosity from tip (7.2 ± 2.3%, N = 10) to the substrate (48.5 ± 1.1%, N = 10), providing high mechanical strength at the tip and hygroscopicity across the microneedle. With a compression failure force of 0.51 ± 0.13 N (N = 10), it successfully punctured artificial skin model and absorbed 1.40 ± 0.06 µL of liquid in 1 min (N = 10). By using the co-precipitation method, TMB was uniformly distributed inside the microstructure of porous PGA film. It effectively prevents the color errors caused by coffee ring effect. Furthermore, enzymes were well immobilized onto TMB-functionalized PGA film due to its hydrophilicity and porosity. Finally, the sensor exhibits uniform, distinct, and linear color changes in response to glucose with a detection limit of 0.13 mM in the range of 2 to 10 mM.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GlucoseNeedlesPolyglycolic AcidColorimetryBiosensing TechniquesPorosityExtracellular Fluid

Stichwörter der Autor:innen

Colorimetric glucose sensorGradient porous structureMicroneedle array patchPolyglycolic acid

Substanzen

GlucosePolyglycolic Acid

Autor:innen und Institutionen

  • The Institute of Technological Sciences, Wuhan University, Wuhan, 430072, China.
  • Institute of Industrial Science, The University of Tokyo, Tokyo, 153-8505, Japan.
  • School of Power and Mechanical Engineering, Wuhan University, Wuhan, 430072, China.
  • The Institute of Technological Sciences, Wuhan University, Wuhan, 430072, China. li_hui@whu.edu.cn.
  • School of Power and Mechanical Engineering, Wuhan University, Wuhan, 430072, China. li_hui@whu.edu.cn.
  • Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration, Wuhan University, Wuhan, 430072, China. li_hui@whu.edu.cn.

Förderung

  • Department of Science and Technology of Hubei Province

Zitieren

APA

Zhang, Y., Xue, Z., Qin, B., Wu, J., Park, J., Xu, C., Shen, S., Li, H., & Kim, B. (2026). A colorimetric glucose sensor with gradient porous polyglycolic acid (PGA) microneedle array patch. Biomedical Microdevices, 28(2). https://doi.org/10.1007/s10544-026-00827-9

Vancouver

Zhang Y, Xue Z, Qin B, Wu J, Park J, Xu C, et al. A colorimetric glucose sensor with gradient porous polyglycolic acid (PGA) microneedle array patch. Biomedical Microdevices. 2026;28(2). doi:10.1007/s10544-026-00827-9

BibTeX
@article{Zhang2026,
  author = {Zhang, Yunfan and Xue, Zifan and Qin, Boyu and Wu, Jiaze and Park, Jongho and Xu, Chensong and Shen, Shengnan and Li, Hui and Kim, Beomjoon},
  title = {A colorimetric glucose sensor with gradient porous polyglycolic acid (PGA) microneedle array patch},
  journal = {Biomedical Microdevices},
  year = {2026},
  volume = {28},
  number = {2},
  doi = {10.1007/s10544-026-00827-9}
}
Kostenlos starten →