EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Autonomous Aerosol and Plasma Co‐Jet Printing of Metallic Devices at Ambient Temperature

Yipu Du, Jinyu Yang, Kaidong Song, Qiang Jiang, Md Omarsany Bappy, Yuchen Zhu, David B Go iD, Yanliang Zhang iD

Small · 2025-03 · 21 (11)

DOI: 10.1002/smll.202409751 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 16.02.2025. Verfasst von Yipu Du und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace and Mechanical Engineering, University of Notre Dame, Notre Dame, IN, 46556, USA. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing of metallic materials holds the potential to revolutionize the fabrication of functional devices unattainable via traditional methods. Despite recent advancements, printing metallic materials typically requires thermal processing at elevated temperatures to form dense structures with desired properties, which presents a major challenge for direct printing and integration with temperature‐sensitive materials. Herein, a unique co‐jet printing (CJP) method is reported integrating an aerosol jet and a non‐thermal, atmospheric pressure plasma jet to enable concurrent aerosol deposition of metal nanoparticle inks and in situ sintering at ambient temperature. A machine learning algorithm is integrated with the CJP to perform real‐time defect detection and autonomous correction, enhancing the yield of printed films with high electrical conductivity from 44% to 94%. Concurrent printing and sintering eliminate the need for post‐printing processing, reducing the overall manufacturing time by multiple folds depending on product size. CJP enables direct printing of functional devices on a variety of temperature‐sensitive materials including biological materials. Direct printing of hydration sensors on living plant leaves is demonstrated for long‐duration monitoring of hydration level in the plant. The versatile CJP method opens tremendous opportunities to harmoniously integrate abiotic and biotic materials for emerging applications in wearable/implantable devices and biohybrid systems.

Schlagwörter

Stichwörter der Autor:innen

aerosol and plasma co‐jet printingambient temperature processingmachine learning optimizationmetal nanoparticles

Autor:innen und Institutionen

  • Department of Aerospace and Mechanical Engineering, University of Notre Dame, Notre Dame, IN, 46556, USA.
  • Department of Chemical and Biomolecular Engineering, University of Notre Dame, Notre Dame, IN, 46556, USA.

ORCID-Profile: David B Go, Yanliang Zhang

Förderung

  • U.S. Department of Energy

Zitieren

APA

Du, Y., Yang, J., Song, K., Jiang, Q., Bappy, M. O., Zhu, Y., Go, D. B., & Zhang, Y. (2025). Autonomous Aerosol and Plasma Co‐Jet Printing of Metallic Devices at Ambient Temperature. Small, 21(11). https://doi.org/10.1002/smll.202409751

Vancouver

Du Y, Yang J, Song K, Jiang Q, Bappy MO, Zhu Y, et al. Autonomous Aerosol and Plasma Co‐Jet Printing of Metallic Devices at Ambient Temperature. Small. 2025;21(11). doi:10.1002/smll.202409751

BibTeX
@article{Du2025,
  author = {Du, Yipu and Yang, Jinyu and Song, Kaidong and Jiang, Qiang and Bappy, Md Omarsany and Zhu, Yuchen and Go, David B and Zhang, Yanliang},
  title = {Autonomous Aerosol and Plasma Co‐Jet Printing of Metallic Devices at Ambient Temperature},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {11},
  doi = {10.1002/smll.202409751}
}
Kostenlos starten →