EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Aerosol Jet Printing for Neuroprosthetic Device Development

Lander De Waele, Massimo Di Pietro, Stefano Perilli iD, Emanuele Mantini, Giulio Trevisan, Michela Simoncini iD, Massimo Panella iD, Viviana Betti, Matteo Laffranchi, Dante Mantini iD

Bioengineering · 28.06.2025 · 12 (7) · 707

DOI: 10.3390/bioengineering12070707 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Bioengineering, online erschienen am 28.06.2025. Verfasst von Lander De Waele und 9 weiteren Autor:innen. Beteiligte Einrichtung: Movement Control and Neuroplasticity Research Group, KU Leuven, Tervuursevest 101, 3001 Leuven, Belgium. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, Ministero dell'università e della ricerca, Italian Ministry of University and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aerosol jet printing (AJP) technology has emerged as a transformative tool in neuroprosthetic device development, offering high accuracy and versatility in fabricating complex and miniaturized structures, which are essential for advanced neural interfaces. This review explores the fundamental principles of AJP, highlighting its unique aerosol generation and concentrated deposition mechanisms, which facilitate the use of different materials on a variety of substrates. The advantages of AJP, including its device scalability, ability to print on flexible and stretchable substrates, and compatibility with a wide range of biocompatible materials, are examined in the context of neuroprosthetic applications. Key implementations, such as the fabrication of neural interfaces, the development of microelectrode arrays, and the integration with flexible electronics, are discussed, showcasing the potential of AJP to revolutionize neuroprosthetic devices. Additionally, this review addresses the challenges of biocompatibility and technical limitations, such as the long-term stability of electroconductive traces. The review concludes with a discussion of future directions and innovations, emphasizing the realization of sensorized prosthetic limbs through the incorporation of tactile sensors, the integration of biosensors for monitoring physiological parameters, and the development of intelligent prostheses. These prospects underscore the role of AJP in the advancement of neuroprosthetic applications and its pathway toward clinical translation and commercialization.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingaerosol jet printingbiocompatible materialsneural interfacesneuroprosthetic devices

Autor:innen und Institutionen

  • Movement Control and Neuroplasticity Research Group, KU Leuven, Tervuursevest 101, 3001 Leuven, Belgium.
  • Department of Industrial Engineering and Mathematical Sciences, Polytechnic University of Marche, Via Brecce Bianche 12, 60131 Ancona, Italy.
  • Comec Innovative S.r.l., Via Papa Leone XIII 34, 66100 Chieti, Italy.
  • Department of Information Engineering, Electronics and Telecommunications, University of Rome "La Sapienza", Via Eudossiana 18, 00184 Rome, Italy.
  • Department of Psychology, University of Rome "La Sapienza", Via dei Marsi 78, 00185 Rome, Italy.
  • Laboratory of Neuroscience and Applied Technology, IRCCS Santa Lucia Foundation, Via Ardeatina 306, 00179 Rome, Italy.

ORCID-Profile: Stefano Perilli, Michela Simoncini, Massimo Panella, Dante Mantini

Förderung

  • European Commission
  • Ministero dell'università e della ricerca
  • Italian Ministry of University and Research

Zitieren

APA

De Waele, L., Di Pietro, M., Perilli, S., Mantini, E., Trevisan, G., Simoncini, M., Panella, M., Betti, V., Laffranchi, M., & Mantini, D. (2025). Aerosol Jet Printing for Neuroprosthetic Device Development. Bioengineering, 12(7), 707. https://doi.org/10.3390/bioengineering12070707

Vancouver

De Waele L, Di Pietro M, Perilli S, Mantini E, Trevisan G, Simoncini M, et al. Aerosol Jet Printing for Neuroprosthetic Device Development. Bioengineering. 2025;12(7):707. doi:10.3390/bioengineering12070707

BibTeX
@article{DeWaele2025,
  author = {De Waele, Lander and Di Pietro, Massimo and Perilli, Stefano and Mantini, Emanuele and Trevisan, Giulio and Simoncini, Michela and Panella, Massimo and Betti, Viviana and Laffranchi, Matteo and Mantini, Dante},
  title = {Aerosol Jet Printing for Neuroprosthetic Device Development},
  journal = {Bioengineering},
  year = {2025},
  volume = {12},
  number = {7},
  pages = {707},
  doi = {10.3390/bioengineering12070707}
}
Kostenlos starten →