EUVIMEDAtrasti EUVIMED
Crossref

A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers

Subham Kumar Bhoi, Alok Satapathy

Polymer Composites · 2026-11-16

DOI: 10.1002/pc.71872 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-16. Written by Subham Kumar Bhoi and 1 co-authors. 47 references.

SantraukaBibliografiniai duomenysCiteRelated studies

Abstract (original language)

This study investigates the drilling performance of glass‐steel‐epoxy hybrid composites with two stacking configurations, G7S4 and G4S7, using a Taguchi L 25 design. The effects of spindle speed (1000–3000 rpm), feed rate (20–100 mm/min), and drill diameter (2–10 mm) on thrust force, torque, and exit‐side delamination factor are investigated. Analysis of variance revealed that drill diameter is the dominant parameter affecting thrust force, contributing 63.49% and 60.93% for G7S4 and G4S7, respectively, while its contribution to torque is 66.37% and 68.06%. In contrast, feed rate is the most influential parameter governing delamination, contributing 71.44% for G7S4 and 69.58% for G4S7. For the combined drilling responses, feed rate showed the highest influence, with contributions of 58.94% and 59.40% for G7S4 and G4S7, respectively, followed by drill diameter. Grey relational analysis identified optimum experimental combinations of 1500 rpm, 20 mm/min, and 4 mm for G7S4 and 2000 rpm, 20 mm/min, and 6 mm for G4S7. The findings of this study suggest that by increasing the steel reinforced layers, improved results such as reduced exit‐side delamination are obtained, highlighting the influence of hybrid stacking architecture on drilling performance.

Cite

APA

Bhoi, S. K., & Satapathy, A. (2026). A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers. Polymer Composites. https://doi.org/10.1002/pc.71872

Vancouver

Bhoi SK, Satapathy A. A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers. Polymer Composites. 2026. doi:10.1002/pc.71872

BibTeX
@article{Bhoi2026,
  author = {Bhoi, Subham Kumar and Satapathy, Alok},
  title = {A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71872}
}
Start for free →