A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers
Polymer Composites · 16.11.2026
DOI: 10.1002/pc.71872 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 16.11.2026. Verfasst von Subham Kumar Bhoi und 1 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.
Abstract (Originalsprache)
This study investigates the drilling performance of glass‐steel‐epoxy hybrid composites with two stacking configurations, G7S4 and G4S7, using a Taguchi L 25 design. The effects of spindle speed (1000–3000 rpm), feed rate (20–100 mm/min), and drill diameter (2–10 mm) on thrust force, torque, and exit‐side delamination factor are investigated. Analysis of variance revealed that drill diameter is the dominant parameter affecting thrust force, contributing 63.49% and 60.93% for G7S4 and G4S7, respectively, while its contribution to torque is 66.37% and 68.06%. In contrast, feed rate is the most influential parameter governing delamination, contributing 71.44% for G7S4 and 69.58% for G4S7. For the combined drilling responses, feed rate showed the highest influence, with contributions of 58.94% and 59.40% for G7S4 and G4S7, respectively, followed by drill diameter. Grey relational analysis identified optimum experimental combinations of 1500 rpm, 20 mm/min, and 4 mm for G7S4 and 2000 rpm, 20 mm/min, and 6 mm for G4S7. The findings of this study suggest that by increasing the steel reinforced layers, improved results such as reduced exit‐side delamination are obtained, highlighting the influence of hybrid stacking architecture on drilling performance.
Zitieren
APA
Bhoi, S. K., & Satapathy, A. (2026). A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers. Polymer Composites. https://doi.org/10.1002/pc.71872
Vancouver
Bhoi SK, Satapathy A. A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers. Polymer Composites. 2026. doi:10.1002/pc.71872
BibTeX
@article{Bhoi2026,
author = {Bhoi, Subham Kumar and Satapathy, Alok},
title = {A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers},
journal = {Polymer Composites},
year = {2026},
doi = {10.1002/pc.71872}
}
EUVIMED