EUVIMEDAvasta EUVIMED
Crossref

Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide

Sai Ma, Lele Jiang, Hui Zhao, Ying Liu, Ankun Xie, Yuhao Cao, Amato Abe, Ying Liu, Danyang Zhao, Rao Fu, Fuji Wang

Polymer Composites · 2026-10-10 · 47 (19) · 17473-17486

DOI: 10.1002/pc.71427 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-08-20. Written by Sai Ma and 10 co-authors. 30 references. Funded by: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstraktBibliograafilised andmedCiteRelated studies

Abstract (original language)

This study systematically elucidates the comprehensive influence of back pressure and screw speed—two key processing parameters in injection molding—on the fiber‐state characteristics and mechanical performance of carbon‐fiber‐reinforced polymer composites. High‐precision characterization of fiber dispersion, fiber orientation, and fiber length was achieved using advanced image‐recognition techniques. Building on these results, the underlying mechanisms by which injection‐molding parameters govern the mechanical behavior of the composite were further clarified. The experimental results indicate that both back pressure and screw speed exert nonlinear effects on the tensile strength. The data show that the tensile strength reaches a maximum of 262 MPa at a back pressure of 8 MPa, while the highest tensile strength of 261 MPa is obtained at a screw speed of 90 rpm. This study advances the understanding of the relationships among processing parameters, fiber‐state characteristics, and mechanical performance, and serves as a valuable case study for the application of artificial intelligence in composite process optimization, macro‐scale characterization, and failure analysis.

Funding

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Cite

APA

Ma, S., Jiang, L., Zhao, H., Liu, Y., Xie, A., Cao, Y., Abe, A., Liu, Y., Zhao, D., Fu, R., & Wang, F. (2026). Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide. Polymer Composites, 47(19), 17473-17486. https://doi.org/10.1002/pc.71427

Vancouver

Ma S, Jiang L, Zhao H, Liu Y, Xie A, Cao Y, et al. Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide. Polymer Composites. 2026;47(19):17473-17486. doi:10.1002/pc.71427

BibTeX
@article{Ma2026,
  author = {Ma, Sai and Jiang, Lele and Zhao, Hui and Liu, Ying and Xie, Ankun and Cao, Yuhao and Abe, Amato and Liu, Ying and Zhao, Danyang and Fu, Rao and Wang, Fuji},
  title = {Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {19},
  pages = {17473--17486},
  doi = {10.1002/pc.71427}
}
Start for free →