Carbon Fiber-Reinforced Polyamide 6 Composites: Impact of Fiber Type and Concentration on the Mechanical Properties
Materials · 22.03.2025 · 18 (7) · 1413
DOI: 10.3390/ma18071413 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.03.2025. Verfasst von Weiping Dong und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Urban Rail Transit Intelligent Operation and Maintenance Technology & Equipment of Zhejiang Province, Zhejiang Normal University, J…. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pioneer and Leading Goose R&D Program of Zhejiang Province, Jianbing Research and Development Plan of Zhejiang Province, The Major and Key Science and Technology Plan Project of Jinhua City.
Abstract (Originalsprache)
To investigate the influence of varying concentrations and types of carbon fiber (CF) on the mechanical properties of polyamide 6 (PA6) composites, this study explores the mechanical properties of PA6 composites with various CF types and quantities. The micro-morphology of the composites and the CF length distribution were characterized. The results indicate that the inclusion of carbon fibers significantly enhances the tensile, flexural, and notched impact strengths of PA6. Specifically, when about 30 wt% of CF T300 was added, the tensile and flexural strength of the composite reached a maximum of 166 MPa and 224 MPa, respectively, representing increases of 236.6% and 229.6%, respectively, compared to pure PA6. The maximum flexural modulus achieved 14.6 GPa, which was six times as large as that of pure PA6. Moreover, the CF length in the PA6 matrix follows a near-Gaussian distribution. A proper CF length and orientation, along with strong interfacial bonding between CF and the PA6 matrix, contribute to improved mechanical properties. The overall performance of T700-reinforced composites is better than that of T300-reinforced ones due to T700’s higher precursor strength and better fiber-length retention. This study provides guidance for fabricating high-performance PA6 composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Urban Rail Transit Intelligent Operation and Maintenance Technology & Equipment of Zhejiang Province, Zhejiang Normal University, Jinhua 321000, China.
- Zhejiang Baojing Carbon Materials Co., Ltd., Shaoxing 311800, China.
- Weida Cosmetics Packaging Industrial, Jinhua 321000, China.
ORCID-Profile: Shiju E
Förderung
- Pioneer and Leading Goose R&D Program of Zhejiang Province
- Jianbing Research and Development Plan of Zhejiang Province
- The Major and Key Science and Technology Plan Project of Jinhua City
- Pioneer and Leading Goose R&D Program of Zhejiang Province
- Major and Key Science and Technology Plan Project of Jinhua City
Zitieren
APA
Dong, W., Yu, Z., Sun, X., Hu, Z., E, S., Tong, F., Wang, S., & Li, X. (2025). Carbon Fiber-Reinforced Polyamide 6 Composites: Impact of Fiber Type and Concentration on the Mechanical Properties. Materials, 18(7), 1413. https://doi.org/10.3390/ma18071413
Vancouver
Dong W, Yu Z, Sun X, Hu Z, E S, Tong F, et al. Carbon Fiber-Reinforced Polyamide 6 Composites: Impact of Fiber Type and Concentration on the Mechanical Properties. Materials. 2025;18(7):1413. doi:10.3390/ma18071413
BibTeX
@article{Dong2025,
author = {Dong, Weiping and Yu, Zhaozhu and Sun, Xingxiang and Hu, Zhonglue and E, Shiju and Tong, Fangqiang and Wang, Sisi and Li, Xiping},
title = {Carbon Fiber-Reinforced Polyamide 6 Composites: Impact of Fiber Type and Concentration on the Mechanical Properties},
journal = {Materials},
year = {2025},
volume = {18},
number = {7},
pages = {1413},
doi = {10.3390/ma18071413}
}
EUVIMED