EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Multi-Stage Compression Molding Parameters on Mechanical Properties and Damage Behavior of Cross-Ply Continuous Carbon Fiber-Reinforced Polycarbonate Laminates

Zhanhui Wang iD, Haonan Liu, Furen Xiao iD, Haichao Hu, Yan Bi

Polymers · 06.11.2026 · 18 (21) · 2769

DOI: 10.3390/polym18212769 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.11.2026. Verfasst von Zhanhui Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, China. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjin Municipal Science and Technology Commission, Tianjin Science and Technology Plan Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Processing conditions govern the mechanical response of continuous carbon fiber-reinforced polycarbonate (CCF/PC) laminates. This study examined variations in mechanical properties and associated damage in cross-ply laminates using an L9 orthogonal design varying pre-molding temperature, consolidation pressure, and consolidation time. Tensile, flexural, and short-beam tests were combined with descriptive factor-level mean and range analyses, scanning electron microscopy, and post-test computed tomography. The largest observed factor-level range corresponded to temperature for tensile strength, pressure for tensile modulus, and time for flexural properties and apparent interlaminar shear strength (ILSS). All five properties reached their highest time-level mean at 10 min. Among the tested combinations, 210 °C–1.0 MPa–15 min gave the highest mean tensile strength and apparent ILSS (752 and 21.4 MPa), whereas 210 °C–2.0 MPa–10 min gave the highest tensile modulus, flexural strength, and flexural modulus (61.5 GPa, 720 MPa, and 67.5 GPa). Representative tensile fracture surfaces associated higher specimen strength with matrix attachment and tearing, and lower specimen strength with interfacial separation. Flexural specimens exhibited compression-side damage and delamination. These findings distinguish property-specific processing responses and show that interpreting flexural performance requires consideration of both compression-side and interlaminar damage.

Schlagwörter

Stichwörter der Autor:innen

carbon fibercross-ply laminatesdamage behaviormulti-stage compression moldingorthogonal analysispolycarbonate

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, China.
  • School of Mechanical Engineering, Tianjin Sino-German University of Applied Sciences, Tianjin 300350, China.

ORCID-Profile: Zhanhui Wang, Furen Xiao

Förderung

  • Tianjin Municipal Science and Technology Commission
  • Tianjin Science and Technology Plan Project

Zitieren

APA

Wang, Z., Liu, H., Xiao, F., Hu, H., & Bi, Y. (2026). Effects of Multi-Stage Compression Molding Parameters on Mechanical Properties and Damage Behavior of Cross-Ply Continuous Carbon Fiber-Reinforced Polycarbonate Laminates. Polymers, 18(21), 2769. https://doi.org/10.3390/polym18212769

Vancouver

Wang Z, Liu H, Xiao F, Hu H, Bi Y. Effects of Multi-Stage Compression Molding Parameters on Mechanical Properties and Damage Behavior of Cross-Ply Continuous Carbon Fiber-Reinforced Polycarbonate Laminates. Polymers. 2026;18(21):2769. doi:10.3390/polym18212769

BibTeX
@article{Wang2026,
  author = {Wang, Zhanhui and Liu, Haonan and Xiao, Furen and Hu, Haichao and Bi, Yan},
  title = {Effects of Multi-Stage Compression Molding Parameters on Mechanical Properties and Damage Behavior of Cross-Ply Continuous Carbon Fiber-Reinforced Polycarbonate Laminates},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2769},
  doi = {10.3390/polym18212769}
}
Kostenlos starten →