Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide
Polymer Composites · 10.10.2026 · 47 (19) · 17473-17486
DOI: 10.1002/pc.71427 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 20.08.2026. Verfasst von Sai Ma und 10 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
This study systematically elucidates the comprehensive influence of back pressure and screw speed—two key processing parameters in injection molding—on the fiber‐state characteristics and mechanical performance of carbon‐fiber‐reinforced polymer composites. High‐precision characterization of fiber dispersion, fiber orientation, and fiber length was achieved using advanced image‐recognition techniques. Building on these results, the underlying mechanisms by which injection‐molding parameters govern the mechanical behavior of the composite were further clarified. The experimental results indicate that both back pressure and screw speed exert nonlinear effects on the tensile strength. The data show that the tensile strength reaches a maximum of 262 MPa at a back pressure of 8 MPa, while the highest tensile strength of 261 MPa is obtained at a screw speed of 90 rpm. This study advances the understanding of the relationships among processing parameters, fiber‐state characteristics, and mechanical performance, and serves as a valuable case study for the application of artificial intelligence in composite process optimization, macro‐scale characterization, and failure analysis.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Ma, S., Jiang, L., Zhao, H., Liu, Y., Xie, A., Cao, Y., Abe, A., Liu, Y., Zhao, D., Fu, R., & Wang, F. (2026). Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide. Polymer Composites, 47(19), 17473-17486. https://doi.org/10.1002/pc.71427
Vancouver
Ma S, Jiang L, Zhao H, Liu Y, Xie A, Cao Y, et al. Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide. Polymer Composites. 2026;47(19):17473-17486. doi:10.1002/pc.71427
BibTeX
@article{Ma2026,
author = {Ma, Sai and Jiang, Lele and Zhao, Hui and Liu, Ying and Xie, Ankun and Cao, Yuhao and Abe, Amato and Liu, Ying and Zhao, Danyang and Fu, Rao and Wang, Fuji},
title = {Effects of Injection Molding Parameters on Fiber States and Mechanical Properties of Carbon‐Fiber‐Reinforced Polyamide},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {19},
pages = {17473--17486},
doi = {10.1002/pc.71427}
}
EUVIMED