EUVIMEDSkopri EUVIMED
Crossref

Investigation of thermo‐mechanical and viscoelastic properties of 3D ‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites

Vinod Ayyappan, Sanjay Mavinkere Rangappa, Jiratti Tengsuthiwat, Vincenzo Fiore, Suchart Siengchin

Polymer Composites · 2024-04-20 · 45 (6) · 5372-5385

DOI: 10.1002/pc.28133 ↗

At a glance

Journal article in Polymer Composites, published online on 2024-01-19. Written by Vinod Ayyappan and 4 co-authors. Cited 50 times so far (Crossref); 42 references. Funded by: King Mongkut's University of Technology North Bangkok.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

The current study focuses on the development of innovative bio‐based filaments using new natural lignocellulosic particles obtained from the bark of the Morinda citrifolia L. plant as reinforcement. Polylactic acid (PLA 4043D) filaments with a diameter of 1.75 mm were produced by varying the volume fraction of M . citrifolia bark particles (MCBP) in three compositions (i.e., 0%, 3%, and 6%). These filaments were then used to print test specimens, which underwent quasi‐static mechanical tests (i.e., tensile and flexural; thermal characterization, thermo‐mechanical tests, and visco‐elastic analysis). The experimental findings demonstrated a remarkable improvement in the tensile strength (i.e., +15%) when the PLA was reinforced with 6% in volume of lignocellulosic particles. Additionally, 3% MCBP and 6% MCBP composites showed substantial increases in flexural strength and modulus (i.e., +25% and +34%), respectively; in comparison to the neat matrix. Moreover, the 3D‐printed composites exhibited significant enhancements in storage modulus, glass transition temperature, and structural stability at elevated temperatures. Hence, this work highlights the potential of the developed bio‐based filaments as feedstock filament material, enabling the production of various customized lightweight products in the automotive and sports industries like cycling helmets, protective guards, knee guards, etc. Highlights Innovative bio‐based filaments are developed for FDM 3D printing. Morinda citrifolia bark particles (MCBPs) reduce warping risk in PLA printing. The hot crystallization enthalpy of PLA increases with the addition of MCBP. 6% MCBP‐PLA exhibits the best mechanical performances. MCBP reinforcement reduces the thermal expansion of PLA.

Funding

  • King Mongkut's University of Technology North Bangkok

Cite

APA

Ayyappan, V., Rangappa, S. M., Tengsuthiwat, J., Fiore, V., & Siengchin, S. (2024). Investigation of thermo‐mechanical and viscoelastic properties of 3D ‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites. Polymer Composites, 45(6), 5372-5385. https://doi.org/10.1002/pc.28133

Vancouver

Ayyappan V, Rangappa SM, Tengsuthiwat J, Fiore V, Siengchin S. Investigation of thermo‐mechanical and viscoelastic properties of 3D ‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites. Polymer Composites. 2024;45(6):5372-5385. doi:10.1002/pc.28133

BibTeX
@article{Ayyappan2024,
  author = {Ayyappan, Vinod and Rangappa, Sanjay Mavinkere and Tengsuthiwat, Jiratti and Fiore, Vincenzo and Siengchin, Suchart},
  title = {Investigation of thermo‐mechanical and viscoelastic properties of 3D ‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {6},
  pages = {5372--5385},
  doi = {10.1002/pc.28133}
}
Start for free →