Valorization of Tomato Agricultural Waste for 3D-Printed Polymer Composites Based on Poly(lactic acid)
Polymers · 29.05.2024 · 16 (11) · 1536
DOI: 10.3390/polym16111536 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.05.2024. Verfasst von Sotirios Pemas und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Research and Technology Hellas, Information Technologies Institute, 6th km Charilaou-Thermi Road, 57001 Thessaloniki, Greece. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 research and innovation programme, Horizon 2020 PestNu project.
Abstract (Originalsprache)
Agricultural waste is a renewable source of lignocellulosic components, which can be processed in a variety of ways to yield added-value materials for various applications, e.g., polymer composites. However, most lignocellulosic biomass is incinerated for energy. Typically, agricultural waste is left to decompose in the fields, causing problems such as greenhouse gas release, attracting insects and rodents, and impacting soil fertility. This study aims to valorise nonedible tomato waste with no commercial value in Additive Manufacturing (AM) to create sustainable, cost-effective and added-value PLA composites. Fused Filament Fabrication (FFF) filaments with 5 and 10 wt.% tomato stem powder (TSP) were developed, and 3D-printed specimens were tested. Mechanical testing showed consistent tensile properties with 5% TSP addition, while flexural strength decreased, possibly due to void formation. Dynamic mechanical analysis (DMA) indicated changes in storage modulus and damping factor with TSP addition. Notably, the composites exhibited antioxidant activity, increasing with higher TSP content. These findings underscore the potential of agricultural waste utilization in FFF, offering insights into greener waste management practices and addressing challenges in mechanical performance and material compatibility. This research highlights the viability of integrating agricultural waste into filament-based AM, contributing to sustainable agricultural practices and promoting circular economy initiatives.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Research and Technology Hellas, Information Technologies Institute, 6th km Charilaou-Thermi Road, 57001 Thessaloniki, Greece.
- Laboratory of Chemical and Environmental Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
- Laboratory of Chemistry and Technology of Polymers and Colors, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
- Laboratory of Industrial Chemistry, Department of Chemistry, University of Ioannina, 45110 Ioannina, Greece.
ORCID-Profile: Sotirios Pemas, Dimitrios Gkiliopoulos, Dimitrios N Bikiaris, Zoi Terzopoulou, Eleftheria Maria Pechlivani
Förderung
- European Union's Horizon 2020 research and innovation programme
- Horizon 2020 PestNu project
Zitieren
APA
Pemas, S., Gkiliopoulos, D., Samiotaki, C., Bikiaris, D. N., Terzopoulou, Z., & Pechlivani, E. M. (2024). Valorization of Tomato Agricultural Waste for 3D-Printed Polymer Composites Based on Poly(lactic acid). Polymers, 16(11), 1536. https://doi.org/10.3390/polym16111536
Vancouver
Pemas S, Gkiliopoulos D, Samiotaki C, Bikiaris DN, Terzopoulou Z, Pechlivani EM. Valorization of Tomato Agricultural Waste for 3D-Printed Polymer Composites Based on Poly(lactic acid). Polymers. 2024;16(11):1536. doi:10.3390/polym16111536
BibTeX
@article{Pemas2024,
author = {Pemas, Sotirios and Gkiliopoulos, Dimitrios and Samiotaki, Christina and Bikiaris, Dimitrios N and Terzopoulou, Zoi and Pechlivani, Eleftheria Maria},
title = {Valorization of Tomato Agricultural Waste for 3D-Printed Polymer Composites Based on Poly(lactic acid)},
journal = {Polymers},
year = {2024},
volume = {16},
number = {11},
pages = {1536},
doi = {10.3390/polym16111536}
}
EUVIMED