EUVIMEDEUVIMED entdecken
Crossref

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Akash Jain, Adit Mishra, Abhinav Kumar Dubey, Akash Kumar, Ankit Sahai, Rahul Swarup Sharma

Journal of Thermoplastic Composite Materials · 2023-09 · 36 (9) · 3618-3643

DOI: 10.1177/08927057221133089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermoplastic Composite Materials, online erschienen am 12.10.2022. Verfasst von Akash Jain und 5 weiteren Autor:innen. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused Filament Fabrication (FFF) is the most prevalent additive manufacturing technique, which involves extruding a softened thermoplastic filament through the nozzle of a heated extruder. For improving the mechanical properties of the FFF-printed PLA parts one of the options is to add reinforcing material, such as carbonaceous materials or metal particles. The present study deals with analysing and comparing mechanical properties of carbon fibre reinforced poly lactic acid (CF-PLA), graphene reinforced PLA (Gr-PLA) and multi walled carbon nano tubes reinforced PLA (MWCNTs-PLA) composites by FFF. The selected process parameters used in this study are raster angle (0 ° , 45 ° , 90 ° ), feed rate (20 mm/s, 40 mm/s, 60 mm/s) and layer height (0.1 mm, 0.15 mm, 0.2 mm) and based on different combinations, elongation at break, modulus and tensile strength are examined. MWCNTs-PLA exhibits overall maximum tensile strength, 37.438 MPa with 15.384% elongation at break for layer height 0.1 mm, raster angle 0 ° and feed rate 20 mm/s as compared to other selected specimens. Fractography analysis is also done to better understand the failure modes of specimens. To examine the dependency of the tensile strength on the process parameters, ANOVA, Taguchi’s L9 array Design of Experiment (DOE) is utilized indicating that layer height has the highest contribution of 56.713% for Gr-PLA, but raster angle has the highest contribution of 54.899% and 76.16% for CF-PLA and MWCNTs-PLA, respectively. This work will help in better understanding of how different parameters effects the material properties for PLA composites.

Zitieren

APA

Jain, A., Mishra, A., Dubey, A. K., Kumar, A., Sahai, A., & Sharma, R. S. (2023). Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs. Journal of Thermoplastic Composite Materials, 36(9), 3618-3643. https://doi.org/10.1177/08927057221133089

Vancouver

Jain A, Mishra A, Dubey AK, Kumar A, Sahai A, Sharma RS. Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs. Journal of Thermoplastic Composite Materials. 2023;36(9):3618-3643. doi:10.1177/08927057221133089

BibTeX
@article{Jain2023,
  author = {Jain, Akash and Mishra, Adit and Dubey, Abhinav Kumar and Kumar, Akash and Sahai, Ankit and Sharma, Rahul Swarup},
  title = {Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs},
  journal = {Journal of Thermoplastic Composite Materials},
  year = {2023},
  volume = {36},
  number = {9},
  pages = {3618--3643},
  doi = {10.1177/08927057221133089}
}
Kostenlos starten →