High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding
Polymer Composites · 2024-02-20 · 45 (3) · 2101-2113
DOI: 10.1002/pc.27906 ↗At a glance
Journal article in Polymer Composites, published online on 2023-11-14. Written by Federico Olivieri and 10 co-authors. Cited 24 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY-NC-ND 4.0).
Abstract (original language)
Acrylonitrile‐butadiene‐styrene (ABS) based composites with a high content of tungsten and bismuth oxide were developed using an innovative process to obtain lead‐free x‐ray shielding materials. ABS was chosen for its good mechanical properties and its widespread availability as a recycled material. The composites underwent flexural tests, Shore D hardness tests, thermogravimetric and morphological analysis, and their x‐ray attenuation properties were determined through numerical simulations and experimental measurements. Despite their high filler content (up to 75 wt%), the composites showed good filler dispersion within the polymeric matrix and maintained their mechanical properties. Across the investigated energy range (50–150 kV), the lead equivalence for x‐ray shielding was achieved with composite plates containing 75 wt% of tungsten and bismuth oxide, at thickness values corresponding to a weight increase of only 29% and 36%, respectively, in comparison to lead. These findings pave the way for a new generation of lead‐free x‐ray shielding materials. Moreover, their mechanical properties, including flexibility for potential application in wearable personal protective equipment, can be tailored by adjusting the filler content. Highlights High filler content lead‐free ABS composites with WO 3 and Bi 2 O 3 were developed. They show good polymer/filler interfacial adhesion and flexural properties. Numerical simulations of their x‐ray shielding properties were performed. Experimental tests with polychromatic sources confirmed good x‐ray attenuation. Results pave the way for the development of new lead‐free x‐ray shielding systems.
Cite
APA
Olivieri, F., Avolio, R., Gentile, G., Mazzone, A., Rizzi, R., Nacucchi, M., Castaldo, R., Errico, M. E., Giannini, C., Ambrosio, L., & Lavorgna, M. (2024). High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding. Polymer Composites, 45(3), 2101-2113. https://doi.org/10.1002/pc.27906
Vancouver
Olivieri F, Avolio R, Gentile G, Mazzone A, Rizzi R, Nacucchi M, et al. High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding. Polymer Composites. 2024;45(3):2101-2113. doi:10.1002/pc.27906
BibTeX
@article{Olivieri2024,
author = {Olivieri, Federico and Avolio, Roberto and Gentile, Gennaro and Mazzone, Annamaria and Rizzi, Rosanna and Nacucchi, Michele and Castaldo, Rachele and Errico, Maria Emanuela and Giannini, Cinzia and Ambrosio, Luigi and Lavorgna, Marino},
title = {High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding},
journal = {Polymer Composites},
year = {2024},
volume = {45},
number = {3},
pages = {2101--2113},
doi = {10.1002/pc.27906}
}
EUVIMED