EUVIMEDEUVIMED entdecken
Crossref

Investigation of electrical, electromagnetic interference shielding and tensile properties of 3D-printed acrylonitrile butadiene styrene/carbon nanotube composites

Amir Hossein Maleki, Abbas Zolfaghari

Journal of Thermoplastic Composite Materials · 2024-07 · 37 (7) · 2409-2424

DOI: 10.1177/08927057231216736 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermoplastic Composite Materials, online erschienen am 16.11.2023. Verfasst von Amir Hossein Maleki und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: Babol Noshirvani University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive polymer composites (CPCs) are manufactured by compounding conductive particles with a polymer matrix. There are many applications where they are used, including light-weight applications requiring both electrical and heat conductivity. Carbon nanotubes (CNTs) have been accepted as common materials to accomplish this goal. As part of this research, a material extrusion additive manufacturing (AM) process was utilized to create nanocomposites by a 3D-printing technique. Multi-wall carbon nanotubes (MWCNTs) were mixed in 1, 3 and 6 wt fractions with acrylonitrile butadiene styrene (ABS) and extruded in filament form. Three-dimensionally printed specimens were used to evaluate electrical, electromagnetic interference shielding effectiveness (EMI SE) and tensile properties. The electrical conductivity of the material was 26 times greater than that of ABS. In the X-band of electromagnetic waves, EMI SE's reflected and absorbed portions increased respectively 4 and 16 times. The tensile strength and modulus were enhanced by 15% and 9%, respectively. On composite specimens, microwave heat treatment was applied. There is less void space between the rasters and layers, which helps improve tensile properties. Additionally, 3D-printed specimens were tested for melt flow rate (MFR) and dynamic mechanical behaviour. The nozzle has experienced some wear due to the intrinsic abrasive nature of CNTs.

Förderung

  • Babol Noshirvani University of Technology

Zitieren

APA

Maleki, A. H., & Zolfaghari, A. (2024). Investigation of electrical, electromagnetic interference shielding and tensile properties of 3D-printed acrylonitrile butadiene styrene/carbon nanotube composites. Journal of Thermoplastic Composite Materials, 37(7), 2409-2424. https://doi.org/10.1177/08927057231216736

Vancouver

Maleki AH, Zolfaghari A. Investigation of electrical, electromagnetic interference shielding and tensile properties of 3D-printed acrylonitrile butadiene styrene/carbon nanotube composites. Journal of Thermoplastic Composite Materials. 2024;37(7):2409-2424. doi:10.1177/08927057231216736

BibTeX
@article{Maleki2024,
  author = {Maleki, Amir Hossein and Zolfaghari, Abbas},
  title = {Investigation of electrical, electromagnetic interference shielding and tensile properties of 3D-printed acrylonitrile butadiene styrene/carbon nanotube composites},
  journal = {Journal of Thermoplastic Composite Materials},
  year = {2024},
  volume = {37},
  number = {7},
  pages = {2409--2424},
  doi = {10.1177/08927057231216736}
}
Kostenlos starten →