EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding

Federico Olivieri, Roberto Avolio, Gennaro Gentile, Annamaria Mazzone, Rosanna Rizzi, Michele Nacucchi, Rachele Castaldo, Maria Emanuela Errico, Cinzia Giannini, Luigi Ambrosio, Marino Lavorgna

Polymer Composites · 20.02.2024 · 45 (3) · 2101-2113

DOI: 10.1002/pc.27906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 14.11.2023. Verfasst von Federico Olivieri und 10 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Acrylonitrile‐butadiene‐styrene (ABS) based composites with a high content of tungsten and bismuth oxide were developed using an innovative process to obtain lead‐free x‐ray shielding materials. ABS was chosen for its good mechanical properties and its widespread availability as a recycled material. The composites underwent flexural tests, Shore D hardness tests, thermogravimetric and morphological analysis, and their x‐ray attenuation properties were determined through numerical simulations and experimental measurements. Despite their high filler content (up to 75 wt%), the composites showed good filler dispersion within the polymeric matrix and maintained their mechanical properties. Across the investigated energy range (50–150 kV), the lead equivalence for x‐ray shielding was achieved with composite plates containing 75 wt% of tungsten and bismuth oxide, at thickness values corresponding to a weight increase of only 29% and 36%, respectively, in comparison to lead. These findings pave the way for a new generation of lead‐free x‐ray shielding materials. Moreover, their mechanical properties, including flexibility for potential application in wearable personal protective equipment, can be tailored by adjusting the filler content. Highlights High filler content lead‐free ABS composites with WO 3 and Bi 2 O 3 were developed. They show good polymer/filler interfacial adhesion and flexural properties. Numerical simulations of their x‐ray shielding properties were performed. Experimental tests with polychromatic sources confirmed good x‐ray attenuation. Results pave the way for the development of new lead‐free x‐ray shielding systems.

Zitieren

APA

Olivieri, F., Avolio, R., Gentile, G., Mazzone, A., Rizzi, R., Nacucchi, M., Castaldo, R., Errico, M. E., Giannini, C., Ambrosio, L., & Lavorgna, M. (2024). High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding. Polymer Composites, 45(3), 2101-2113. https://doi.org/10.1002/pc.27906

Vancouver

Olivieri F, Avolio R, Gentile G, Mazzone A, Rizzi R, Nacucchi M, et al. High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding. Polymer Composites. 2024;45(3):2101-2113. doi:10.1002/pc.27906

BibTeX
@article{Olivieri2024,
  author = {Olivieri, Federico and Avolio, Roberto and Gentile, Gennaro and Mazzone, Annamaria and Rizzi, Rosanna and Nacucchi, Michele and Castaldo, Rachele and Errico, Maria Emanuela and Giannini, Cinzia and Ambrosio, Luigi and Lavorgna, Marino},
  title = {High filler content acrylonitrile‐butadiene‐styrene composites containing tungsten and bismuth oxides for effective lead‐free x‐ray radiation shielding},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {3},
  pages = {2101--2113},
  doi = {10.1002/pc.27906}
}
Kostenlos starten →