An Open‐Source, Reproducible MRI Data Acquisition and Reconstruction Workflow Using Pulseq: Multi‐Site and Cross‐Vendor Validation
Magnetic Resonance in Medicine · 2026
DOI: 10.1002/mrm.70548 ↗At a glance
Journal article in Magnetic Resonance in Medicine, 2026. Written by Qingping Chen and 12 co-authors. Institution: Division of Medical Physics, Department of Radiology, University Medical Center Freiburg, Faculty of Medicine, University of Freiburg, Freiburg, Germ…. Major MEDLINE topics: Magnetic Resonance Imaging, Image Processing, Computer-Assisted. Cited 1 times so far (Crossref); 81 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Union under Horizon Europe Grant Agreement 1011078393, MRITwins, NIH HHS, NINDS NIH HHS.
Abstract (original language)
Purpose
Reproducibility in MRI is limited by variability in data acquisition, formatting, and reconstruction across sites and vendors. This work aimed to mitigate these challenges through an open‐source, vendor‐independent workflow originally developed for the 2023–24 ISMRM Repeat It with Me: Reproducibility Team Challenge .
Methods
Pulseq, extended with advanced features including LABELs and Sequence Definitions for k‐space description and execution instructions, was used to harmonize data acquisition. Pulseq‐generated raw k‐space data were converted into the MRD format using these metadata. Open‐source, vendor‐independent image reconstruction and post‐processing were performed with Gadgetron. Additionally, vendor‐native online reconstructions on Siemens platforms (ICE and OpenRecon) were enabled for Pulseq‐based sequences. The workflow was validated using MPRAGE and EPI protocols in phantoms and in vivo across nine scanners from five sites and four vendors. Vendor‐native acquisition and reconstruction protocols were executed for comparison.
Results
Pulseq‐based sequences executed successfully on all systems, with all data converted and reconstructed without errors. Pulseq‐based, Gadgetron‐reconstructed images showed good agreement with corresponding vendor‐native images across scanners; however, qualitative and quantitative differences remained. Despite detailed natural‐language descriptions and meticulous console configuration, vendor‐native protocols introduced subtle but notable cross‐platform differences in sequence execution and reconstruction. In contrast, the proposed workflow achieved highly consistent sequence execution via Pulseq and standardized reconstruction through Gadgetron across scanners.
Conclusion
We established an open‐source MRI workflow that harmonizes data acquisition, formatting, and reconstruction across sites and vendors. This workflow represents a critical step toward fully open and reproducible MRI, facilitating transparency, standardization, and collaboration across the research community.
Subjects
MeSH terms (MEDLINE)
Author keywords
Authors and institutions
- Division of Medical Physics, Department of Radiology, University Medical Center Freiburg, Faculty of Medicine, University of Freiburg, Freiburg, Germany.
- Department of Radiology and Oncology, Center for Image Sciences, University Medical Center Utrecht, Utrecht, the Netherlands.
- Department of Electrical and Computer Engineering, University of Michigan, Ann Arbor, Michigan, USA.
- Shanghai United Imaging Healthcare Co. Ltd., Shanghai, China.
- Wuhan United Imaging Life Science Instrument Co. Ltd., Wuhan, China.
- Athinoula A. Martinos Center for Biomedical Imaging, Massachusetts General Hospital, Boston, Massachusetts, USA.
ORCID profiles: Qingping Chen, Thomas H M Roos, Amaya Murguia, Sebastian Littin, Berkin Bilgic
Funding
- European Union under Horizon Europe Grant Agreement 1011078393, MRITwins
- NIH HHS
- NINDS NIH HHS
- Deutsche Forschungsgemeinschaft
- European Partnership on Metrology, co-financed from the European Union's Horizon Europe Research and Innovation Programme and by the Participating States
- NIBIB NIH HHS
- National Institutes of Health
- European Association of National Metrology Institutes
Cite
APA
Chen, Q., Roos, T. H. M., Murguia, A., Xie, Y., Liu, Z., Xu, P., Fujita, S., Littin, S., Rathi, Y., Zhu, J., Bilgic, B., Nielsen, J. F., & Zaitsev, M. (2026). An Open‐Source, Reproducible MRI Data Acquisition and Reconstruction Workflow Using Pulseq: Multi‐Site and Cross‐Vendor Validation. Magnetic Resonance in Medicine. https://doi.org/10.1002/mrm.70548
Vancouver
Chen Q, Roos THM, Murguia A, Xie Y, Liu Z, Xu P, et al. An Open‐Source, Reproducible MRI Data Acquisition and Reconstruction Workflow Using Pulseq: Multi‐Site and Cross‐Vendor Validation. Magnetic Resonance in Medicine. 2026. doi:10.1002/mrm.70548
BibTeX
@article{Chen2026,
author = {Chen, Qingping and Roos, Thomas H M and Murguia, Amaya and Xie, Yuhai and Liu, Zheng and Xu, Pengcheng and Fujita, Shohei and Littin, Sebastian and Rathi, Yogesh and Zhu, Jiayu and Bilgic, Berkin and Nielsen, Jon-Fredrik and Zaitsev, Maxim},
title = {An Open‐Source, Reproducible MRI Data Acquisition and Reconstruction Workflow Using Pulseq: Multi‐Site and Cross‐Vendor Validation},
journal = {Magnetic Resonance in Medicine},
year = {2026},
doi = {10.1002/mrm.70548}
}
EUVIMED