Bilateral extended FDK: An improved weighting method for static CT imaging
Medical Physics · 2024
DOI: 10.1002/mp.16639 ↗Kurz gefasst
Fachartikel in der Zeitschrift Medical Physics, 2024. Verfasst von Keyang Zha und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Biological Science & Medical Engineering, Southeast University, Nanjing, China. Hauptthemen laut MEDLINE: Tomography, X-Ray Computed, Algorithms. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 21 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Jiangsu Provincial Key R&D Program, Special Project of Basic Research on Frontier Leading Technology of Jiangsu Province.
Abstract (Originalsprache)
Background
Improving imaging speed has always been the focus of research in CT technology, which is related to the radiation dose and imaging quality of moving organs, including heart and blood vessels. However, it is difficult to achieve further improvement by increasing the rotation speed of the gantry due to its structural strength limitation. Differing from the conventional CTs, the static CT employs dozens of ray sources to acquire projection data from different angular ranges, and each source only needs to be rotated in a small range to finish a full 360° scan, thus greatly increasing the scanning speed.
Purpose
As sources of static CT need to be evenly distributed over 360°, the sources and detectors have to be arranged on two parallel rings independently. Such a geometry can be considered as a special case of CT systems with a significantly large cone angle, that is, a part of the detector is missing in the vicinity of the mid‐plane. Due to restriction of upper and lower bounds of the cone angle of the static CT, there are uneven projection data varying in each portion of the reconstruction volume, the conventional analytical or iterative reconstruction methods may introduce artifacts in the reconstructed outcomes.
Methods
Following the weighting approach extended FDK (xFDK) by Grimmer et al., we propose an improved bilateral xFDK algorithm (bixFDK), which focuses on the reconstruction of the expanded volume. With the same philosophy as xFDK in terms of weighting function design, bixFDK takes the longitudinal offset of the detector with respect to the source into consideration, making our method applicable to a wide range of CT geometries, especially for the static CT. Based on the proposed bixFDK, a new iterative scheme bixFDK‐IR is also constructed to extend the applications to a wide range of scan protocols such as sparse‐view scan.
Results
The proposed method has been validated with the simulated phantom data and the actual clinical data of the static CT, and demonstrates that it can ensure good image quality and enlarge the reconstruction volume in z‐direction of the static CT.
Conclusions
The bixFDK algorithm is an ideal reconstruction approach for static CT geometry, and the iterative scheme of bixFDK‐IR is applicable to a wide range of CT geometries and scan protocols, thus providing a wide range of application scenarios.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Biological Science & Medical Engineering, Southeast University, Nanjing, China.
- Nanovision Technology (Beijing) Co.,Ltd., Beijing, China.
Förderung
- National Natural Science Foundation of China
- Jiangsu Provincial Key R&D Program
- Special Project of Basic Research on Frontier Leading Technology of Jiangsu Province
Zitieren
APA
Zha, K., Zhao, Q., Luo, S., & Li, Y. (2024). Bilateral extended FDK: An improved weighting method for static CT imaging. Medical Physics. https://doi.org/10.1002/mp.16639
Vancouver
Zha K, Zhao Q, Luo S, Li Y. Bilateral extended FDK: An improved weighting method for static CT imaging. Medical Physics. 2024. doi:10.1002/mp.16639
BibTeX
@article{Zha2024,
author = {Zha, Keyang and Zhao, Qingxian and Luo, Shouhua and Li, Yunxiang},
title = {Bilateral extended FDK: An improved weighting method for static CT imaging},
journal = {Medical Physics},
year = {2024},
doi = {10.1002/mp.16639}
}
EUVIMED