EUVIMEDOpdag EUVIMED
Übersichtsarbeit

Advances of Modified Lignin as Substitute to Develop Lignin‐Based Phenol‐Formaldehyde Resin Adhesives

Zhenwen Peng, Xiao Jiang, Chuanling Si, Aldo Joao Cárdenas-Oscanoa, Caoxing Huang

ChemSusChem · 2023-08-07 · 16 (15)

DOI: 10.1002/cssc.202300174 ↗

At a glance

Übersichtsarbeit in ChemSusChem, published online on 2023-06-20. Written by Zhenwen Peng and 4 co-authors. Institution: Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanj…. Cited 123 times so far (Crossref); 127 references. Funded by: Natural Science Foundation of Jiangsu Province, National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Traditionally, phenols used to prepare phenol‐formaldehyde (PF) resin adhesives are obtained from phenolic compounds and various chemicals, which are extracted from petroleum‐based raw materials. Lignin, a sustainable phenolic macromolecule in the cell wall of biomass with an aromatic ring and a phenolic hydroxyl group similar to those of phenol, can be an ideal substitute for phenol in PF resin adhesives. However, only a few lignin‐based adhesives are produced on a large scale in industry, mainly because of the low activity of lignin. Preparing lignin‐based PF resin adhesives with exceptional achievements by modifying lignin instead of phenol is an efficient method to improve the economic benefits and protect the environment. In this review, the latest progress in the preparation of PF resin adhesives via lignin modification, including chemical, physical, and biological modifications, is discussed. In addition, the advantages and disadvantages of different lignin modification methods for adhesives are compared and discussed, and future research directions for the synthesis of lignin‐based PF resin adhesives are proposed.

Subjects

Author keywords

biological modificationchemical modificationligninphenol-formaldehyde adhesivephysical modification

Authors and institutions

  • Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing, 210037, P. R. China.
  • Department of Forestry Biomaterials, North Carolina State University Campus Box 8005, Raleigh, NC 27695-8005, USA.
  • Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, 300457, P. R. China.
  • Forest Industry Department, Faculty of Forest Science, Universidad Nacional Agraria La Molina, Lima, 15024, Perú.

Funding

  • Natural Science Foundation of Jiangsu Province
  • National Natural Science Foundation of China

Cite

APA

Peng, Z., Jiang, X., Si, C., Joao Cárdenas-Oscanoa, A., & Huang, C. (2023). Advances of Modified Lignin as Substitute to Develop Lignin‐Based Phenol‐Formaldehyde Resin Adhesives. ChemSusChem, 16(15). https://doi.org/10.1002/cssc.202300174

Vancouver

Peng Z, Jiang X, Si C, Joao Cárdenas-Oscanoa A, Huang C. Advances of Modified Lignin as Substitute to Develop Lignin‐Based Phenol‐Formaldehyde Resin Adhesives. ChemSusChem. 2023;16(15). doi:10.1002/cssc.202300174

BibTeX
@article{Peng2023,
  author = {Peng, Zhenwen and Jiang, Xiao and Si, Chuanling and Joao Cárdenas-Oscanoa, Aldo and Huang, Caoxing},
  title = {Advances of Modified Lignin as Substitute to Develop Lignin‐Based Phenol‐Formaldehyde Resin Adhesives},
  journal = {ChemSusChem},
  year = {2023},
  volume = {16},
  number = {15},
  doi = {10.1002/cssc.202300174}
}
Start for free →