Phenol–Formaldehyde Adhesives Modified with Eucalyptus Lignin: The Advantages of Soda Lignin
Polymers · 16.12.2025 · 17 (24) · 3319
DOI: 10.3390/polym17243319 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.12.2025. Verfasst von Leonardo Clavijo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering Institute, Faculty of Engineering, Universidad de la República, Julio Herrera y Reissig 565, Montevideo 11300, Uruguay. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación e Innovación.
Abstract (Originalsprache)
This study investigates the performance of phenol–formaldehyde adhesives containing Eucalyptus lignin as an extender in their formulation. A commercial phenol–formaldehyde resin was used, and five different types of lignin were tested: (1) kraft lignin precipitated with carbon dioxide, (2) kraft lignin precipitated with sulfuric acid, (3) soda lignin precipitated with hydrochloric acid, (4) soda lignin precipitated with sulfuric acid, and (5) a second soda lignin where the wood underwent a phosphoric acid extraction process prior to alkaline extraction. The lignins were used both unmodified and activated through three different processes: hydroxymethylation, phenolysis in an acidic medium, and alkaline phenolysis. Adhesives were formulated with substitution percentages of the base resin ranging from 10% to 60%, in addition to a reference adhesive that contained no lignin. Wooden test specimens were manufactured to determine the tensile shear strength. Results indicate that best performance is achieved when lignins are activated through hydroxymethylation and when soda lignin is used. Under optimal conditions, it is possible to replace at least 45% of the base resin with activated Eucalyptus soda lignin, which represents a reduction of at least 30% in the cost of the final adhesive. This substitution results in a 46% increase in adhesive strength compared to the base adhesive (without lignin). These findings suggest that the valorization Eucalyptus soda lignin could have significant economic and environmental benefits.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemical Engineering Institute, Faculty of Engineering, Universidad de la República, Julio Herrera y Reissig 565, Montevideo 11300, Uruguay.
- Regional University Center of the Northeast, Universidad de la República, Route 5, km. 386.5, Tacuarembó 45000, Uruguay.
- Independent Consultant, 27002 Lugo, Spain.
ORCID-Profile: Leonardo Clavijo, Rodrigo Coniglio, Juan Martín Rodao, Diego Passarella, Andrés Dieste
Förderung
- Agencia Nacional de Investigación e Innovación
Zitieren
APA
Clavijo, L., Coniglio, R., Bermúdez, F., Rodao, J. M., Passarella, D., & Dieste, A. (2025). Phenol–Formaldehyde Adhesives Modified with Eucalyptus Lignin: The Advantages of Soda Lignin. Polymers, 17(24), 3319. https://doi.org/10.3390/polym17243319
Vancouver
Clavijo L, Coniglio R, Bermúdez F, Rodao JM, Passarella D, Dieste A. Phenol–Formaldehyde Adhesives Modified with Eucalyptus Lignin: The Advantages of Soda Lignin. Polymers. 2025;17(24):3319. doi:10.3390/polym17243319
BibTeX
@article{Clavijo2025,
author = {Clavijo, Leonardo and Coniglio, Rodrigo and Bermúdez, Fabián and Rodao, Juan Martín and Passarella, Diego and Dieste, Andrés},
title = {Phenol–Formaldehyde Adhesives Modified with Eucalyptus Lignin: The Advantages of Soda Lignin},
journal = {Polymers},
year = {2025},
volume = {17},
number = {24},
pages = {3319},
doi = {10.3390/polym17243319}
}
EUVIMED