EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Paper-Based Laminates Impregnated with a Hybrid Lignin-Phenol-Formaldehyde Resin

Miroslav Němec, Kateřina Hájková iD, Štěpán Hýsek iD

Materials · 27.03.2023 · 16 (7) · 2669

DOI: 10.3390/ma16072669 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.03.2023. Verfasst von Miroslav Němec und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Science Prague, Kamýcká 129, 165 21 P…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech University of Life Sciences Prague, EVA 4.0, OP RDE.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, high-pressure laminates (HPL) impregnated with phenol-formaldehyde (PF) resins enriched with kraft lignin were developed. Pulverised kraft lignin was added to the commercial PF resin in the amounts of 1% and 5% (solid to solid). Laminates were manufactured using pressure impregnation of the resins into the papers and using hot pressing of HPL in a laboratory press. Laminates with a lignin content of 1% (L-LPF-1) showed the highest bending strength (72.42 MPa) and Brinell hardness (9.41); they also exhibited the best moisture uptake (9.61) and thickness swelling after immersion in water (3.32%). Except for impact bending, laminates with a lignin content of 5% (L-LPF-5) had worse properties. However, the differences between the variants are mostly not statistically significant and are comparable with the results of commercial PF resin. Scanning electron microscopy confirmed the homogenous structure of produced laminates and the occurrence of cohesive failures in ruptured L-LPF-1 laminates, whereas in ruptured L-LPF-5 laminates adhesive failures were also observed. Based on the conducted research it can be said that the utilisation of kraft lignin as an additive to PF resin (in the amount of 1%) has a positive effect on the produced HPL.

Schlagwörter

Stichwörter der Autor:innen

kraft ligninlaminatemechanical propertiesphenol formaldehydepressing

Autor:innen und Institutionen

  • Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Science Prague, Kamýcká 129, 165 21 Prague, Czech Republic.

ORCID-Profile: Kateřina Hájková, Štěpán Hýsek

Förderung

  • Czech University of Life Sciences Prague
  • EVA 4.0
  • OP RDE

Zitieren

APA

Němec, M., Hájková, K., & Hýsek, Š. (2023). Paper-Based Laminates Impregnated with a Hybrid Lignin-Phenol-Formaldehyde Resin. Materials, 16(7), 2669. https://doi.org/10.3390/ma16072669

Vancouver

Němec M, Hájková K, Hýsek Š. Paper-Based Laminates Impregnated with a Hybrid Lignin-Phenol-Formaldehyde Resin. Materials. 2023;16(7):2669. doi:10.3390/ma16072669

BibTeX
@article{Nmec2023,
  author = {Němec, Miroslav and Hájková, Kateřina and Hýsek, Štěpán},
  title = {Paper-Based Laminates Impregnated with a Hybrid Lignin-Phenol-Formaldehyde Resin},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2669},
  doi = {10.3390/ma16072669}
}
Kostenlos starten →