EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fluid–structure interaction analysis of a healthy aortic valve and its surrounding haemodynamics

Zhongjie Yin, Chlöe Armour, Harkamaljot Kandail, Declan P O'Regan, Toufan Bahrami, Saeed Mirsadraee, Selene Pirola iD, Xiao Yun Xu iD

International Journal for Numerical Methods in Biomedical Engineering · 2024-11 · 40 (11)

DOI: 10.1002/cnm.3865 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 29.08.2024. Verfasst von Zhongjie Yin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Imperial College London, London, UK. Hauptthemen laut MEDLINE: Aortic Valve, Hemodynamics, Models, Cardiovascular, Magnetic Resonance Imaging. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medical Research Council, British Heart Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The opening and closing dynamics of the aortic valve (AV) has a strong influence on haemodynamics in the aortic root, and both play a pivotal role in maintaining normal physiological functions of the valve. The aim of this study was to establish a subject‐specific fluid–structure interaction (FSI) workflow capable of simulating the motion of a tricuspid healthy valve and the surrounding haemodynamics under physiologically realistic conditions. A subject‐specific aortic root was reconstructed from magnetic resonance (MR) images acquired from a healthy volunteer, whilst the valve leaflets were built using a parametric model fitted to the subject‐specific aortic root geometry. The material behaviour of the leaflets was described using the isotropic hyperelastic Ogden model, and subject‐specific boundary conditions were derived from 4D‐flow MR imaging (4D‐MRI). Strongly coupled FSI simulations were performed using a finite volume‐based boundary conforming method implemented in FlowVision. Our FSI model was able to simulate the opening and closing of the AV throughout the entire cardiac cycle. Comparisons of simulation results with 4D‐MRI showed a good agreement in key haemodynamic parameters, with stroke volume differing by 7.5% and the maximum jet velocity differing by less than 1%. Detailed analysis of wall shear stress (WSS) on the leaflets revealed much higher WSS on the ventricular side than the aortic side and different spatial patterns amongst the three leaflets.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Aortic ValveHemodynamicsModels, CardiovascularMagnetic Resonance ImagingHumansStress, MechanicalComputer Simulation

Stichwörter der Autor:innen

aortic valvefluid–structure interactionhaemodynamicswall shear stress

Autor:innen und Institutionen

  • Department of Chemical Engineering, Imperial College London, London, UK.
  • National Heart and Lung Institute, Imperial College London, London, UK.
  • Medtronic Neurovascular, Irvine, California, USA.
  • Laboratory of Medical Sciences, Imperial College London, London, UK.
  • Department of Cardiothoracic Surgery, Royal Brompton and Harefield Hospitals NHS Trust, London, UK.
  • Department of Radiology, Royal Brompton and Harefield Hospitals NHS Trust, London, UK.

ORCID-Profile: Selene Pirola, Xiao Yun Xu

Förderung

  • Medical Research Council
  • British Heart Foundation

Zitieren

APA

Yin, Z., Armour, C., Kandail, H., O'Regan, D. P., Bahrami, T., Mirsadraee, S., Pirola, S., & Xu, X. Y. (2024). Fluid–structure interaction analysis of a healthy aortic valve and its surrounding haemodynamics. International Journal for Numerical Methods in Biomedical Engineering, 40(11). https://doi.org/10.1002/cnm.3865

Vancouver

Yin Z, Armour C, Kandail H, O'Regan DP, Bahrami T, Mirsadraee S, et al. Fluid–structure interaction analysis of a healthy aortic valve and its surrounding haemodynamics. International Journal for Numerical Methods in Biomedical Engineering. 2024;40(11). doi:10.1002/cnm.3865

BibTeX
@article{Yin2024,
  author = {Yin, Zhongjie and Armour, Chlöe and Kandail, Harkamaljot and O'Regan, Declan P and Bahrami, Toufan and Mirsadraee, Saeed and Pirola, Selene and Xu, Xiao Yun},
  title = {Fluid–structure interaction analysis of a healthy aortic valve and its surrounding haemodynamics},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2024},
  volume = {40},
  number = {11},
  doi = {10.1002/cnm.3865}
}
Kostenlos starten →