4D-Flow MRI and Vector Ultrasound in the In-Vitro Evaluation of Surgical Aortic Heart Valves – a Pilot Study
Journal of Cardiovascular Translational Research · 2025
DOI: 10.1007/s12265-024-10564-0 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift Journal of Cardiovascular Translational Research, 2025. Verfasst von Henrik Stephan und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cardiac Surgery, LMU Hospital - Campus Großhadern, Marchioninistraße 15, 81377, Munich, Germany. Hauptthemen laut MEDLINE: Aortic Valve, Heart Valve Prosthesis, Hemodynamics, Heart Valve Prosthesis Implantation. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Klinikum der Universität München.
Abstract (Originalsprache)
Introduction
The aim of this study was the initial investigation of 4D-Flow MRI and Vector Ultrasound as novel imaging techniques in the in-vitro analysis of hemodynamics in anatomical models. Specifically, by looking at the hemodynamic performance of state-of-the-art surgical heart valves in a 3D-printed aortic arch.
Methods
The mock circulatory loop simulated physiological, pulsatile flow. Two mechanical and three biological aortic valves prostheses were compared in a 3D-printed aortic arch. 4D magnetic resonance imaging and vector flow Doppler ultrasound served as imaging methods. Hemodynamic parameters such as wall shear stress, flow velocities and pressure gradients were analyzed.
Results
The flow analysis revealed characteristic flow-patterns in the 3D-printed aortic arch. The blood-flow in the arch presented complex patterns, including the formation of helixes and vortices. Higher proximal peak velocities and lower flow volumes were found for biological valves.
Conclusion
The mock circulatory loop in combination with modern radiological imaging provides a sufficient basis for the hemodynamic comparison of aortic valves. Graphical Abstract
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Cardiac Surgery, LMU Hospital - Campus Großhadern, Marchioninistraße 15, 81377, Munich, Germany.
- DZHK (German Centre for Cardiovascular Research), Partner Site Munich Heart Alliance, Munich, Germany.
- Department of Radiology, LMU University Hospital, Munich, Germany.
- Siemens Healthineers AG, Erlangen, Germany.
- Chair of Medical Materials and Implants, Department of Mechanical Engineering, TUM School of Engineering, and Design, Munich Institute of Biomedical Engineering, Technical University of Munich, Munich, Germany.
- Department of Cardiac Surgery, LMU Hospital - Campus Großhadern, Marchioninistraße 15, 81377, Munich, Germany. Maximilian.grab@med.uni-muenchen.de.
ORCID-Profile: Maximilian Grab
Förderung
- Klinikum der Universität München
Zitieren
APA
Stephan, H., Grefen, L., Clevert, D., Onkes, M., Ning, J., Thierfelder, N., Mela, P., Hagl, C., Curta, A., & Grab, M. (2025). 4D-Flow MRI and Vector Ultrasound in the In-Vitro Evaluation of Surgical Aortic Heart Valves – a Pilot Study. Journal of Cardiovascular Translational Research. https://doi.org/10.1007/s12265-024-10564-0
Vancouver
Stephan H, Grefen L, Clevert D, Onkes M, Ning J, Thierfelder N, et al. 4D-Flow MRI and Vector Ultrasound in the In-Vitro Evaluation of Surgical Aortic Heart Valves – a Pilot Study. Journal of Cardiovascular Translational Research. 2025. doi:10.1007/s12265-024-10564-0
BibTeX
@article{Stephan2025,
author = {Stephan, Henrik and Grefen, Linda and Clevert, Dirk and Onkes, Meike and Ning, Jin and Thierfelder, Nikolaus and Mela, Petra and Hagl, Christian and Curta, Adrian and Grab, Maximilian},
title = {4D-Flow MRI and Vector Ultrasound in the In-Vitro Evaluation of Surgical Aortic Heart Valves – a Pilot Study},
journal = {Journal of Cardiovascular Translational Research},
year = {2025},
doi = {10.1007/s12265-024-10564-0}
}
EUVIMED