EUVIMEDScopri EUVIMED
Open access · CC BY-NC-ND 4.0

Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties

Larissa Gschwind, Carmen‐Simona Jordan, Norbert Vennemann, Markus L. Susoff

Journal of Applied Polymer Science · 2023-05-05 · 140 (17)

DOI: 10.1002/app.53768 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2023-02-20. Written by Larissa Gschwind and 3 co-authors. Cited 6 times so far (Crossref); 77 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Deutsche Bundesstiftung Umwelt.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Ethylene–propylene–diene rubber (EPDM) scrap was devulcanized in an internal mixer with varying amounts of dibenzamido diphenyl disulfide (DBD) at temperatures below 200°C. The devulcanization effect and sol–gel analyses of the devulcanizates, and the mechanical properties of the sulfur‐cured revulcanizates were studied. Residual DBD was still present in the sol at 160°C and degraded DBD at 200°C. DBD affects the curing leading to poor properties. So, the temperature must be adjusted according to the DBD concentration to obtain a superior recyclate for sealing systems. At 0.4 wt% DBD, the degradation reaction was already complete at 120°C, but only 52% and 61% of the tensile strength σ and strain at break ε of the virgin material were achieved. At 160°C and 2 wt%, the degradation reaction was complete, and the DBD effect on properties was small; 65% and 86% of σ and ε were recovered, respectively. To prevent property degradation, 200°C was required at 3.9 wt% DBD, resulting in 97% and 95% of σ and ε , but only 70% of hardness.

Funding

  • Deutsche Bundesstiftung Umwelt

Cite

APA

Gschwind, L., Jordan, C., Vennemann, N., & Susoff, M. L. (2023). Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties. Journal of Applied Polymer Science, 140(17). https://doi.org/10.1002/app.53768

Vancouver

Gschwind L, Jordan C, Vennemann N, Susoff ML. Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties. Journal of Applied Polymer Science. 2023;140(17). doi:10.1002/app.53768

BibTeX
@article{Gschwind2023,
  author = {Gschwind, Larissa and Jordan, Carmen‐Simona and Vennemann, Norbert and Susoff, Markus L.},
  title = {Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties},
  journal = {Journal of Applied Polymer Science},
  year = {2023},
  volume = {140},
  number = {17},
  doi = {10.1002/app.53768}
}
Start for free →