Upscaling of a Mechanochemical Devulcanization Process for EPDM Rubber Waste from a Batch to a Continuous System
Recycling · 06.01.2023 · 8 (1) · 8
DOI: 10.3390/recycling8010008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Recycling, online erschienen am 06.01.2023. Verfasst von Larissa Gschwind und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Environmental Foundation.
Abstract (Originalsprache)
The present work is a comparative study of the effects of mechanical shear, temperature, and concentration of a chemical agent on the devulcanization process of post-industrial ethylene propylene diene (EPDM) rubber waste. Devulcanization was carried out in a heating press (no shear), an internal mixer (low shear), and a co-rotating twin screw extruder (high shear) at temperatures ranging from 100 to 200 °C. The efficiency of pure dibenzamido diphenyl disulfide (DBD) and a commercial devulcanizing agent, Struktol A89®, containing DBD were studied. Based on the results, the devulcanization process was upscaled from 40 g per batch to a continuous process with a capacity of 270 g/h. The parameters were fine-tuned regarding flow rate, screw speed, and temperature. Blends of virgin rubber (VR) and 25, 50, and 75 wt% recyclates were compared with blends of VR and 25, 50, and 75 wt% of untreated RWP. The quality of the recyclate was determined by rheometer tests, SEM images, TGA, and mechanical properties. The best results were obtained with 2 wt% DBD in the extruder with a temperature profile of 120 to 80 °C, 50 rpm, and 4.5 g per minute (gpm). The tensile strength and strain at break of the recyclate already met the requirements of DIN EN 681-1:2006 for the production of sealing systems. The compression set and Shore A hardness were restored by mixing recyclate with 25 wt% VR.
Förderung
- German Federal Environmental Foundation
Zitieren
APA
Gschwind, L., & Jordan, C. (2023). Upscaling of a Mechanochemical Devulcanization Process for EPDM Rubber Waste from a Batch to a Continuous System. Recycling, 8(1), 8. https://doi.org/10.3390/recycling8010008
Vancouver
Gschwind L, Jordan C. Upscaling of a Mechanochemical Devulcanization Process for EPDM Rubber Waste from a Batch to a Continuous System. Recycling. 2023;8(1):8. doi:10.3390/recycling8010008
BibTeX
@article{Gschwind2023,
author = {Gschwind, Larissa and Jordan, Carmen-Simona},
title = {Upscaling of a Mechanochemical Devulcanization Process for EPDM Rubber Waste from a Batch to a Continuous System},
journal = {Recycling},
year = {2023},
volume = {8},
number = {1},
pages = {8},
doi = {10.3390/recycling8010008}
}
EUVIMED