Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties
Journal of Applied Polymer Science · 05.05.2023 · 140 (17)
DOI: 10.1002/app.53768 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 20.02.2023. Verfasst von Larissa Gschwind und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Deutsche Bundesstiftung Umwelt.
Abstract (Originalsprache)
Ethylene–propylene–diene rubber (EPDM) scrap was devulcanized in an internal mixer with varying amounts of dibenzamido diphenyl disulfide (DBD) at temperatures below 200°C. The devulcanization effect and sol–gel analyses of the devulcanizates, and the mechanical properties of the sulfur‐cured revulcanizates were studied. Residual DBD was still present in the sol at 160°C and degraded DBD at 200°C. DBD affects the curing leading to poor properties. So, the temperature must be adjusted according to the DBD concentration to obtain a superior recyclate for sealing systems. At 0.4 wt% DBD, the degradation reaction was already complete at 120°C, but only 52% and 61% of the tensile strength σ and strain at break ε of the virgin material were achieved. At 160°C and 2 wt%, the degradation reaction was complete, and the DBD effect on properties was small; 65% and 86% of σ and ε were recovered, respectively. To prevent property degradation, 200°C was required at 3.9 wt% DBD, resulting in 97% and 95% of σ and ε , but only 70% of hardness.
Förderung
- Deutsche Bundesstiftung Umwelt
Zitieren
APA
Gschwind, L., Jordan, C., Vennemann, N., & Susoff, M. L. (2023). Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties. Journal of Applied Polymer Science, 140(17). https://doi.org/10.1002/app.53768
Vancouver
Gschwind L, Jordan C, Vennemann N, Susoff ML. Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties. Journal of Applied Polymer Science. 2023;140(17). doi:10.1002/app.53768
BibTeX
@article{Gschwind2023,
author = {Gschwind, Larissa and Jordan, Carmen‐Simona and Vennemann, Norbert and Susoff, Markus L.},
title = {Mechanochemical devulcanization of EPDM rubber waste. Correlation of process parameters with sol–gel analyses and revulcanization properties},
journal = {Journal of Applied Polymer Science},
year = {2023},
volume = {140},
number = {17},
doi = {10.1002/app.53768}
}
EUVIMED