High‐Performance Recycling Biobased Photopolymers for 3D Printing
Advanced Science · 2026-06 · 13 (32)
DOI: 10.1002/advs.75006 ↗At a glance
Journal article in Advanced Science, published online on 2026-03-25. Written by Hang Zhou and 12 co-authors. Institution: College of Chemical Engineering, Jiangsu Co-Innovation Centre of Efficient Processing and Utilization of Forest Resources, Jiangsu Key Lab for the Ch…. Cited 4 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY 4.0). Funded by: Metasequoia Scholars Launch Fund of Nanjing Forestry University, Xingdian Youth Talent Support Plan.
Abstract (original language)
Developing recycling photo‐curing 3D printing materials (especially using renewable biobased feedstocks) can greatly alleviate environmental burden raised by the rapid development of 3D printing industry. Currently, it is still hard to achieve both high performance and excellent recyclability for such materials. In this study, by using a typical biobased phenol (i.e., eugenol) as starting material, we design biobased photopolymers containing dynamic dissociative phenol‐carbamate bonds, part of which come from the phenol itself. The obtained materials not only have relatively high biobased contents, but also demonstrate excellent thermal and mechanical properties. Subsequently, the materials are conveniently recycled by a proposed “mixed‐monomer assisted recycling” strategy, and high recovery efficiencies in at least three cycles were achieved. Furthermore, the materials indicate exceptional 3D printing performance and functionalities (such as oral bacteria inhibition and shape memory) as well as low environmental impacts. Overall, the combination of rigid biobased feedstocks (especially biobased phenols) and suitable dissociative covalent bonds offers the opportunity to develop high performance, recycling photopolymers with more functionalities and better sustainability.
Subjects
Author keywords
Authors and institutions
- College of Chemical Engineering, Jiangsu Co-Innovation Centre of Efficient Processing and Utilization of Forest Resources, Jiangsu Key Lab for the Chemistry and Utilization of Agricultural and Forest Biomass, Nanjing Fo…
- Department of Orthodontics, Nanjing Stomatological Hospital, Affiliated Hospital of Medical School, Institute of Stomatology, Nanjing University, Nanjing, P. R. China.
- Key Laboratory of State Forestry and Grassland Administration on Highly-Efficient Utilization of Forestry Biomass Resources in Southwest China, Southwest Forestry University, Kunming, P. R. China.
ORCID profiles: Yi Tan, Chuanwei Lu, Jianfeng Yao, Zhengchun Cai, Chengguo Liu
Funding
- Metasequoia Scholars Launch Fund of Nanjing Forestry University
- Xingdian Youth Talent Support Plan
Cite
APA
Zhou, H., Tan, Y., Lu, C., Li, Y., Tang, T., Yang, Z., Li, Y., Chen, X., Yao, J., Cai, Z., Jiang, Y., Zhao, P., & Liu, C. (2026). High‐Performance Recycling Biobased Photopolymers for 3D Printing. Advanced Science, 13(32). https://doi.org/10.1002/advs.75006
Vancouver
Zhou H, Tan Y, Lu C, Li Y, Tang T, Yang Z, et al. High‐Performance Recycling Biobased Photopolymers for 3D Printing. Advanced Science. 2026;13(32). doi:10.1002/advs.75006
BibTeX
@article{Zhou2026,
author = {Zhou, Hang and Tan, Yi and Lu, Chuanwei and Li, Yanlin and Tang, Tianyi and Yang, Zheng and Li, Ying and Chen, Xuehan and Yao, Jianfeng and Cai, Zhengchun and Jiang, Yuanyuan and Zhao, Ping and Liu, Chengguo},
title = {High‐Performance Recycling Biobased Photopolymers for 3D Printing},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {32},
doi = {10.1002/advs.75006}
}
EUVIMED